hey guys so the bike is a kawasaki kz 750 e2 model the fork started rising overnight, and has steadily increased. have tried tightening, doesn't want to budge. May be a dumb question but any help would be fantastic. thanks guys.
I don't see any bolts in the pinch clamps on the upper triple. Are those air fittings on top of the upper fork tubes? Have you checked the air pressure in them? Could one fork have more pressure in it than the other?
lingo yes they are air fittings, but we deflated both (with only a little air coming out) and figured that the air pressure had nothing to do with it.
so it happened while the triple was off. i had taken it off to attempt to clean (as you can see poor job). i've tried to tighten the bolts to no avail, not really too sure where to go from here, except for a complete fork dismantle?
hillsy, i would assume so, i have never rode the bike, the forks felt good when i bought the bike, nothing that would point to the RHS missing its spring?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.