small CL 360 project

Ok I've been searching again for other red/ silver.... and low and behold I should have known. Carpy did one red with silver frame. Not sure if this link will work but here it is;
http://www.cb750cafe.com/photo.php?photo=upload/photos/135_0.JPG&folder=photos
 
You know, I have to agree. I love the bike but now I'm not sure if it's the color for me ???
 
what if you did a comprimise of both... shoot the whole tank Black (or blue), then tape it off and do silver scalops?

this is just tits!
PhotoID12711.jpg



or something like this
TriumphAmerica-23.jpg
 
Funny, He has bikes in both black and one in silver lined up with the red one and I kept going back to both of those... Guess that is starting to tell me something
 
The silver and blue is like whoo. Real bad ass looking. but I'm also drawn to the bottom one. It looks a little more vintage which is what I think I'm really after ???. But man I don't know about twotone paint. I'm thinking its beyond my skills.
 
hell no it aint! just tape it off and shoot it! you will be fine! you can use pin strip to get your outline and then mask it off wiht masking tape...
 
JRK5892 said:
hell no it aint! just tape it off and shoot it! you will be fine! you can use pin strip to get your outline and then mask it off wiht masking tape...
Man I don't question it but just getting everything straight and even. On the flip side its only tape right. Just pull it up and start again. I guess you shoot it one color and then tape it off and do t he other color (with epoxy I'd have to wait atleast a week between right?)

on a side note found this picture that I think is so cool. It looks much better larger where you can really look at it. Reminds me of me and my old minibike. I was obsessed with jumping it. Damn near killed my self.
Young20Cafe20Racer1.jpg
 
yep... lay your base... then mask and shoot... ya you would have to wait a week... then lightly wet sand with 2000 grit on the seams (where the silver and blue (or black) meet... then pull out some rubbing compound and buff that area... be soft not to go though the paint but it will get rid of the seam there and look completely smooth!
 
I saw this paint at home depot the other day it is heavy duty industrial enamel. I am thinking it might be the same formula as the epoxy paints but it comes in more colors and it comes in a 14 oz can for only $5 maybe you can find a color in that and you could afford it.
 
Dig the new avatar.

Don't do scallops! I'm doing scallops!

Nah, just joking around. We're in separate states so nobody on the streets of Portland is gonna know that we've got twin 360s! Plus, I'm gonna run that orange tank that everyone likes so much until I can find another 450 tank in decent shape then do the scallops... probably not for a couple more months.
 
troybilt said:
You have some cool parents! i get a chuckle everytime I see this photo. Do you have a larger one? I'd love to have a copy. Your little brother has some stories to tell I'm sure!!

Troy, I can send you a .jpg, but I can't figure out how or if you can add an attachment to a PM. PM me your email if you want it.

CC
 
Hanley, epoxy is epoxy, enamel is enamel.....not the same. That being said, it may be a good way to get strong paint, let us know how it goes...
 
hanly2 said:
I saw this paint at home depot the other day it is heavy duty industrial enamel. I am thinking it might be the same formula as the epoxy paints but it comes in more colors and it comes in a 14 oz can for only $5 maybe you can find a color in that and you could afford it.
Thanks man. I may end up there before this is all finished.

SausageMahoney said:
Dig the new avatar.

Don't do scallops! I'm doing scallops!

Nah, just joking around. We're in separate states so nobody on the streets of Portland is gonna know that we've got twin 360s! Plus, I'm gonna run that orange tank that everyone likes so much until I can find another 450 tank in decent shape then do the scallops... probably not for a couple more months.
Haha, Think I've decided against scallops anyway. I may do some kind of two tone or a stripe.

CC, I still chuckle everytime I look at the photo. Yes I'd love to have a copy. I'll PM at first chance. Thanks!

Well I can't stand this anymore. Like my ole man would say, "shit or get of the pot" or "GEtRdone", by Larry. I've looked at color schemes until I'm sick of it. Figured it was time to do something. Thought I'd start by experminting with color. The primer on the tank has a baby blue hue to it. Not going to to do baby blue!
DSC_0838.jpg


The first color is an enamel. Just wanted to see what color looked like against the silver and black. First I called a body shop and they said that they could hit it with two stage clear for me (I guess it is much harder/durable than stuff in the can). So on goes the blue and...the paint is amazing. It has so much silver metalic it kinda looks anodized. I have to admit that I love the paint but not on this bike... at first. However, it is really growing on me.
DSC_0849.jpg


also pick up some T6061 flat stock 1/8" x3". cut out a lever and drilled a couple of holes but i need to locate a step bit to finish it up. Picked up the bearings and a piece of 5/8" round stock for the toe piece. Thank you Herm! Bearing fits a 3/8" bolt!
DSC_0851.jpg

Almost forgot. Was thinking about using silver to make the Jap sun with the tail light as the sun??? But I'm not sure how to tie it in with the tank?? Input would be greatly appreciated.
 
Swagger said:
Hanley, epoxy is epoxy, enamel is enamel.....not the same. That being said, it may be a good way to get strong paint, let us know how it goes...

Yeh but appliance epoxy paint is not really epoxy it is enamel.

That blue looks real nice kinda looks like the green on my bike, what kind of paint is it?
 
The blue paint looks awesome! And with 2 stage clear it'll look like show paint! I absolutely love it!

If you're going to do the jap sun, which I think would be very cool, just extend the silver "rays" through the tank. From the rear they'll look like rays, from the sides they'll look like racing stripes and since the headlight is silver the whole thing will tie in very nicely!!!! It'll be one really slick look!!! ...but no matter what you decide she's beyond the point of NOT looking anything but spectacular, a great build Troy!!
 
hanly2 said:
Yeh but appliance epoxy paint is not really epoxy it is enamel.

That blue looks real nice kinda looks like the green on my bike, what kind of paint is it?

Well....why do you suppose it's called epoxy then? Are all the cool kids calling their enamel paint epoxy now?
 
Glad you guys like the color. Thanks for the props! The paint grew on me very fast and I love it! I really like the way it looks against the silver frame.
I went ahead and started painting the tank. I got two thin coats on then my wife made me take her to a play in town (yes she is the boss and I do what she says,haha). Couple of big questions here. Should I wait a day or two and do a wet sand of 2000 and finish coating? Also, the only bad thing about using this paint (Hanly, it is rustolium metalic) I won't find a silver to match the frame (I can go brighter or darker silver. Darker would be a charcoal metalic grey) so, I'd love to hit it with the epoxy silver then clear coat it. Does anyone know if this can be done??? On the appliance paint it is listed as "ultra hard enamel" however, it is nothing like enamel. It smells different, looks different, goes on different , takes much longer to dry and once dry it is ultra tough. Has anyone done anything like this? I plan on doing my own research at rustolium but I really don't expect to find much.

Herm, I love the idea of extending the stripes onto the tank. I plan to take some string and see how things line up. I'll post up a couple more photos at first chance.
 
Back
Top Bottom