TripleKing
Been Around the Block
I have been battling carb trouble on my Suzuki T250 project. It will only idle with the choke on. It dies when the choke is closed or the throttle is opened even slightly. Running with the filters on or off makes not difference. I checked for leaks by spraying carb cleaner on all possible leak areas and it makes no difference. I have the side air bleed screw almost all the way in and that helped to where I am now. Also, I got to this point by raisinjg the slides about as far as I can go with the cable adjustors (this model of Mikuni VM has no idle adjustment screw which moves the slide). The carbs have been thoroughly cleaned and blown out with compressed air. The floats are adjusted properly.
I am at a loss.
I am at a loss.