Progress report.....Now 860km . I had my 1st attempt at 100km/h..just made it, but it was very windy. Only upgrade I can do now as far as the performance/speed goes is the 150cc barrel . I may not have run the bike in correctly, Re current 'hard run in ' methods. I am used to 60's/70's period motors and a gentle run in. I feel I should have a bit more 'go' with all the mods done so far , including a 16 tooth front sprocket.
One problem so far has been the after market coil I bought. I had just done a 55km run around town, stoped the bike to do some shopping. Upon restarting about half an hour later the motor only ran for about 5mins then died. I could not restart it.
Ended pushing the bike 5km to get home. I did not bother with the gym that evening.
This morning I had a go at starting the bike, and it fired. Rode it round the block but it was missing intermittently , and stalled again. Checked the plug and it was not sparking , although it was last night before I pushed the bike home. Having some tools on hand would have helped , I could do little in the car park.
Anyway, decided to swap newly fitted electrical components one by one to see if I could sort it out.
1st one I tried was the aftermarket coil....guess what....problem solved....now sending an e-mail to China....Chris..ACT