"Woods" - '73 CB350F

Tango Sucka said:
Why do you need a new triple tree? Are there better then stoc ones available, or is there a problem with yours? I'm just a noob asking questions...
Thanks!
Yeah, mine is cracked because the previous owner tightened it too tight without the proper washers in place.
 
johnny gaijin said:
impact drivers are practically a requirement for our bikes. phillips head bolts? really? WHY!!!??
No kidding, its a joke. I just really hope I can get the bolts out and don't have to go through all the bs some other guys on here have had to deal with. Just got my condensers today so I'm hoping it goes smooth.
 
johnny gaijin said:
impact drivers are practically a requirement for our bikes. phillips head bolts? really? WHY!!!??

Yep. Get a good impact driver. This is one of the tools you don't want to get from harbor freight too.
Might also want to look into changing out bolts. Honda still has most of them cheap and you can get replacements for most at a good fastener shop. I got an allen-head bolt kit for my carbs - much easier to work on them now.
 
johnny gaijin said:
impact drivers are practically a requirement for our bikes. phillips head bolts? really? WHY!!!??


No joke! >:( Who the hell decided that phillips heads was a good idea for an engine. I want to meat this person so I can beat them for all the frustration they have caused me ;) . Yeah +1 on allen-heads, so nice.


JR
 
Headed down to work on the bike this morning. My dad has an impact driver but seems to have lost all the fittings, so I'll have to pick some up. Also plan to pull the forks today, remove the stock shock coverings and put on some gators. Then I'll replace the triple tree and buy some clip-ons.

I started a help thread on removing the forks. I was looking to get some insight on the best practice to do so, mainly because I'll be working by myself and don't want to dump my bike. Hoping to leave the front wheel on.

I'll update tonight with progress
 
Yeahhhh. Wasn't feeling the original paint and since I'm rebuilding and making it into something of my own, new paint is only fitting.

Speaking of new paint, a friend and I went down and did the tank today. I don't want to give it all away yet but I'll get some photos sometime tomorrow or Sunday. So stoked.
 
Re: "Woods" - '73 CB350F (Condenser cover screws f'd)

Currently trying to replace my condensers. The screws were already stripped out by the PO and my impact driver did nothing. Now I'm drilling out the heads of the screws so I can hopefully get the f'ing cover off.
 
So yesterday I drilled out not only the cover to the condensers, but also the alternator cover because they were already stripped out. Picked up some temp. screws at lowes, but will be grabbing some allen heads from fastenal next week. Today I'm going to run down and test ride the bike and see if the new condensers fixed my problem.


P1010969.jpg

New Condensers


P1010961.jpg



Drilled out alternator
 
Please let me know how the trip to Fastenal goes. I deal with them weekly at work, and thought about them for stainless allen heads for my Suzuki's engine covers. Problem is some are only 1 or 2 of each length and I think we'd have to buy a bag of 25 or 50 in each size in order to get what I need.
 
Re: "Woods" - '73 CB350F (Paint and carbs and stuff)

Just got done with roughly a 30-40 minute ride and it looks like the condensors were the problem all along. Now that they're replaced, no more backfiring and dying once the bike gets hot. Glad that's done.


Now I need to get my carbs dialed in. Pulled over after the ride and noticed the right muffler was smoking and popping a little bit. Also noticed carbs 1 and 4 were leaking out of the overflow. Possibly the 90 mains are too large or the floats need to be reset. Also haven't touched the mixture screws or the syncing yet. Aside from the carb work I still need to check valve clearances and get some clip-ons (not feeling the clubmans). As soon as the clip-ons come I can throw on the new gators, headlight brackets and triple tree.


I think I also mentioned I threw some paint and clear on the tank. I'm really happy with how it turned out, here is a little photo for now. I'm not going to be posting anymore full bike shots until the entire thing is done!


tankpaint.jpg
 
Hoosier Daddy said:
Please let me know how the trip to Fastenal goes. I deal with them weekly at work, and thought about them for stainless allen heads for my Suzuki's engine covers. Problem is some are only 1 or 2 of each length and I think we'd have to buy a bag of 25 or 50 in each size in order to get what I need.
Will do!
 
Re: "Woods" - '73 CB350F (Paint and carbs and stuff)

imseamless said:
Just got done with roughly a 30-40 minute ride and it looks like the condensors were the problem all along. Now that they're replaced, no more backfiring and dying once the bike gets hot. Glad that's done.

Dude, glad to hear you got that figured out. And I really love the tank :) let me know about SS alen heads, I might have to get some as well. All we have here is tri-state, haha.

JR
 
Yeah man it was getting really annoying, but there are only so many things it could be and I've damn near went through everything. Pretty excited to get the carbs dialed in so it really goes.


I'll call about the SS allens tomorrow at lunch and see what they say. I'm assuming most late 60's early 70's CBs use the same or similar hardware, so maybe we could do a bulk order for a few of us if they don't sell one off pieces.
 
imseamless said:
I'll call about the SS allens tomorrow at lunch and see what they say. I'm assuming most late 60's early 70's CBs use the same or similar hardware, so maybe we could do a bulk order for a few of us if they don't sell one off pieces.

Sounds like a plan, count me in ;)

JR
 
tacoma screw in fremont is a great place to get hardware in seattle. they don't mind doing small orders, or at least they don't show it. i've need just a couple bolts before and had them just given to me when i went in. i recommend 'em.
 
johnny gaijin said:
tacoma screw in fremont is a great place to get hardware in seattle. they don't mind doing small orders, or at least they don't show it. i've need just a couple bolts before and had them just given to me when i went in. i recommend 'em.
I'll check with them first then- I'd rather support a local company
 
imseamless said:
I'll check with them first then- I'd rather support a local company

Hey Ben, if that works for you let me know what prices are, I might try to convince you to ship me some ;)

JR
 
Back
Top Bottom