"Woods" - '73 CB350F

I spent some time on fastenal.com and they do have single M5 and M6 socket head cap screws (allen bolts) listed. I made up a cart using the parts fische for quantities and printed it off. So all I need to do is walk in and place the order. I went with the zinc coated bolts, those with a little anti-sieze on the threads should be fine for me. Amazingly the 12.9 were cheaper than the 8.8 grade on all but 35mm length, so I splurged the extra 25 cents on that one. brings the total to just under $12 for all four covers fasteners ;D
 
Hoosier Daddy said:
I spent some time on fastenal.com and they do have single M5 and M6 socket head cap screws (allen bolts) listed. I made up a cart using the parts fische for quantities and printed it off. So all I need to do is walk in and place the order. I went with the zinc coated bolts, those with a little anti-sieze on the threads should be fine for me. Amazingly the 12.9 were cheaper than the 8.8 grade on all but 35mm length, so I splurged the extra 25 cents on that one. brings the total to just under $12 for all four covers fasteners ;D
Nice! What bike did yo source them for?
 
The '80 Suzuki GS750. 30 bolts ranging fro 20mm to 100mm lengths. I talked to the Store Manager who was in my Plant yesterday to check our consignment in the Maintenance Dept, and he is going to set me up with my own personal account instead of going through works. He's going to get me the same pricing as work but I can set up shopping lists and save them all online. So once I sort out what fasteners are needed, I can save that list by bike / project. Future orders will be a snap.
 
Nice work! My work has an account too, may be worth a shot if I can receive the same discount.

Thanks for the tip
 
If I gave one of you guys a list of bolts I need think you could hook me up?


I've got some obscure socket cap bolts that Fastenal will only sell in packs of $25. Like M10-1.25 x 30. I need two. Or M10-1.5 x 75.
 
Hadn't checked on this thread in a while. Man that thing really came a long way quick! Nice work.
 
PHeller said:
If I gave one of you guys a list of bolts I need think you could hook me up?


I've got some obscure socket cap bolts that Fastenal will only sell in packs of $25. Like M10-1.25 x 30. I need two. Or M10-1.5 x 75.

Here ya go, both sizes are available single pieces... and a choice of finishes / material. Price is Wholesale listed on their website http://www.fastenal.com/web/search/products/fasteners/sockets/socket-cap-screws/_/N-gj4wbsZjuete9&Nty=0

M10-1.25 x 30mm
Black oxide = SKU: 35758 @ $1.04 (1 ea)
Zinc Plated = SKU: 0142071 @ .53 cents (1 ea)

M10-1.5 x 75mm
Black oxide = SKU: 39647 @ $1.35 (1 ea)
Zinc Plated = SKU: 0141740 @ $1.49 (1 ea)
Stainless = SKU: MS2600075A20000 @ $1.88 (1 ea)
 
IndieSol said:
Hadn't checked on this thread in a while. Man that thing really came a long way quick! Nice work.
Thanks a bunch man! Can't wait to finish and enjoy the summer on it
 
Re: "Woods" - '73 CB350F (Bad news update)

So the bike may be coming along slower in the next week or so. I was walking home Monday night, slipped and twisted my ankle, and walked home. Woke up Tuesday and about fell over when I tried to stand. Limped my way though work that day and come Tuesday evening I couldn't put any weight on my left foot. Ended up staying up till 530AM from the pain. Went to the doctor yesterday and left with drugs, crutches and an appointment with a specialist for an MRI.


Until then, the haze on the picture matches the haze on my brain, but alteast my stupid foot is numb.


crutches.jpg
 
this is the internet, man. you don't have to tell the truth. maybe you didn't slip and fall? maybe you got in a massive karate fight? maybe one of the psychos you thought you had killed with a jump kick was only stunned and maybe he got in a lucky swing with a crowbar from the prone position? just sayin'...

either way: bummer!
 
I haven't seen my motorcycle in over two weeks. Between being stupid busy at work and having a broken foot, it makes it hard to get around to the bike. I am, however, ditching my aircast for my leather boots and hitching a ride down to my motorcycle. Today I'm going to run it around and get some gas through the thing. Depending on how it runs, how my foot feels and how the weather holds, I may ride it back up to Seattle.


There is a shop called North City I'm thinking of taking it to and have them tune in the carbs as I'm having a hell of a time. Anyone heard anything on them?


Other than that I should get my clip ons next week and at that time I can finish the front end. Then its ride all the time and summer weather.
 
Re: "Woods" - '73 CB350F (Update)


Interesting. Rode about 30 miles without issue, then quickly lost power when I was going about 60. It felt like it was starving for gas, which is interesting, because I had a full tank. It wouldn't start and sounded like it wasn't getting gas when I was kicking it over. Pulled the fuel line and sure enough- no gas spilled out. Blew through it into the carbs to ensure there was nothing blocking my fuel line, put the line back on, turned on gas+choke and started wrenching on the throttle. Before long, the overflows were leaking and I got it started. Then it proceeded to piss gas out of carbs 1 and 4 overflow. I tapped on the float bowls with my pocket knife incase the needle was stuck, to no avail. Made it a few miles down the road and the same thing- starved for fuel. This time it took me about 15 minutes to get it started. No combination of choke, fuel on, reserve, throttle open, whatever seemed to get the stupid carbs gas. Finally got it started and it again pissed gas.


My only thought here is something is up with my main jets/float levels. I had recently put some 90's in and THOUGHT I was running rich but now I'm not sure. Looks like I'll be pulling the carbs again!


Anyways, here is a photo I snapped early into the ride. I was riding around the Tacoma area and this was right by Dash Point Park (I think that was the name)


photo-1.jpg
 
Thanks man! I'm pretty excited with how its looking, next weekend I'm hoping to clean up the front end with clip-ons. Just need to get those carbs sorted
 
Wow that turned out excellent.. I bet your very proud of that baby, I know I would be..

Nice job Sir..
 
if you need to take it to a shop i'd recommend maple leaf scooter repair. it's a guy, mike, who works out of his garage but he's a really cool guy, did an awesome job on my bike, doesn't mind a bunch of questions, was cool with me working on my bike in his driveway and just getting some help from him when i needed it, doesn't make you wait forever, and only charges about 60 bucks an hour.

i kind of wish something would go wrong with my bike so i can go hang out with him again.

(206) 299-1756
Maple Leaf Scooter Works
 
Sounds almost like you have two fuel problems. Might check if your vent is plugged in the fuel cap, next time it starves for fuel, try popping the cap and see if you then get fuel flow. Also there is a screen in the petcock that can plug with nasties... Blowing in the hose might might have dislodged it, or pressurized your tank if the vent is the issue, but only for a while.
Now that won't help with the fuel pissing out the vent lines once you do get it flowing. That sounds more like stuck floats or float needles not seating.
 
johnny gaijin said:
if you need to take it to a shop i'd recommend maple leaf scooter repair. it's a guy, mike, who works out of his garage but he's a really cool guy, did an awesome job on my bike, doesn't mind a bunch of questions, was cool with me working on my bike in his driveway and just getting some help from him when i needed it, doesn't make you wait forever, and only charges about 60 bucks an hour.

i kind of wish something would go wrong with my bike so i can go hang out with him again.

(206) 299-1756
Maple Leaf Scooter Works
Sounds like exactly what I am looking for. I'll get ahold of him next week. Thanks man
 
Back
Top Bottom