XS850 - Monoshock & USD Fork (pics pg 13)

i don't think the mud daubers plug up holes it is the leaf cutter bee that will plug up fuel lines left open.they cut up leefs and pack and paste it in tight :'(
 
This big sat outside for what could have been like 6 years before I got it. So God only knows what's in there...
 
treitz said:
This big sat outside for what could have been like 6 years before I got it. So God only knows what's in there...
i nteresting side note when i first started making a full time wage as machinist straight outta hi-school the genius dutchman and his son had all kinds weird projects laying around that were never "finished" but you gotta givem credit fer the creativity .it wasn't really that the designs failed in some un-surmountable way ....it could be dun,but many times the corner cost cutting is what ate'em up, that was obvious,... but alas interest was lost and on to the next by god.the one i saw develop was the artificilial leef cutter bee hive automated gang drill which was bilt with about 200+ tiny spur gears like 1" diameter in a not quite precision enough hand machined gearcase to drive a hundred .200" carbide tiped drill bits into a block of ,kiln dried fur i think it was,in oreder to make homes fer the babies you see .200" is the optimal leef cutter bee home fer babies sizee.this is why the love fuel lines or wear you leave get it leave a bolt out
 
Shot some air through the air jet passageway, put the carbs back on, and WOW. night and day. Didn't test ride it, but at idle, it's so smooth and buttery. Stoked to take it out for a test ride this weekend!

Next order of business is taking some decent photos of it out in the wild.
 
Would love to hear that! And i who thought it idled great before..
Maybe cause it was running great on two.. haha! :)
 
datadavid said:
Would love to hear that! And i who thought it idled great before..
Maybe cause it was running great on two.. haha! :)

Haha maybe! I thought it sounded pretty good too... until I heard it last night. Hardly even sounds like the same bike.
 
treitz said:
Haha maybe! I thought it sounded pretty good too... until I heard it last night. Hardly even sounds like the same bike.
A nice purr is what yer after.. :)
07b081c0e2195992562f4f0b99bbe86e.jpg

Gonna try out the front brake on mine now.
Feels solid!
 
treitz said:
Shot some air through the air jet passageway, put the carbs back on, and WOW. night and day. Didn't test ride it, but at idle, it's so smooth and buttery. Stoked to take it out for a test ride this weekend!

Next order of business is taking some decent photos of it out in the wild.

Hell to the Yes. Glad you've finally got it sorted!!!

Or so we think. :P ::) 8) 8) 8) 8)
 
A couple of crappy pictures of it on the street with my office building in the background this morning. First time I've ridden it since clearing out that air jet. At idle it purrs, at high throttle it screams, at low throttle it cruises just fine. The only issue I feel is in the really low throttle range, and also a little popping at deceleration. Thinking another turn on the air screw might be good... otherwise, I'll just need to test it out a bit more and check the plugs after a while to see how it looks.
 

Attachments

  • IMG_4184.JPG
    IMG_4184.JPG
    409 KB · Views: 338
  • IMG_4186.JPG
    IMG_4186.JPG
    556.6 KB · Views: 369
You can seriously improve low-throttle driveability on cv carbs by lenghtening the intake tracts, about 2-2,5" at least. All for that laminar flow, improves the vacuum signals.
 
Interesting... but I have ZERO room to lengthen the intake. The two outside air filters are just about touching the frame, and the center one is right up to the shock.

It's really not bad, and the popping could be as simple as a little air screw twist.

OH, I also haven't done a full blown vacuum carb sync yet. Was waiting until after I test rode it to see how it felt. My guess is that my bench sync is about as good as you can get on a bench just based on how it's running. But always room for improvement I guess!
 
treitz said:
Interesting... but I have ZERO room to lengthen the intake. The two outside air filters are just about touching the frame, and the center one is right up to the shock.

It's really not bad, and the popping could be as simple as a little air screw twist.

OH, I also haven't done a full blown vacuum carb sync yet. Was waiting until after I test rode it to see how it felt. My guess is that my bench sync is about as good as you can get on a bench just based on how it's running. But always room for improvement I guess!

Yep it could "feel" ok, but the sync will TELL you it is...or isn't. Great pics. Love to see the beast out in the wild!!!
 
Tune-A-Fish said:
Boy... I just can't imagine that thing handling for shit with all that modern suspension ::) :o

Haha honestly I couldn't tell ya. My commute to work is about 2 miles and not very twisty :(

The good news? Roads around me, in literally any direction, are fantastic twisty mountain roads. Just haven't had the time to get out there yet!

Actually... this brings me to a question. I'm going to post pictures of the top of the forks and see if anybody on here knows how to adjust them. I am new to modern forks, and I can't find ANYTHING online that talks about adjusting these things.
 
you will need to adjust the front and rear at the same time for static sag and with rider sag if you cannot get good numbers using the preload then you probably need diff rate springs
at the rear same thing
damping adjustements have zero effect on spring rate or sag and are usually adjusted from a starting point several clicks from fully seated
sag is a % of full travel and of course rider sag is more than static and you could probably start about 25% rider sag
this setups are the most important part of making the bike handle well ,the balance front to rear
when sitting on the bike with hands on bars normal riding position is where sag is set and if you had somebody shove down on your shoulders front and rear should both respond
 
Whoa XB... You're speaking a foreign language to me. I understand how to adjust the rear shock, but twisting it so that the notches click up or down. Based on your lingo, the tighter it is the less sag you'd have?

On the forks, the attached image is what I'm dealing with. Based on where it's sitting, I don't even know where to start/how to adjust it.
 

Attachments

  • FullSizeRender.jpg
    FullSizeRender.jpg
    210.7 KB · Views: 338
Back
Top Bottom