* Laugh it up fuzzball

Refresh History
  • JustinLonghorn: I didn't, Ha.
    Jun 13, 2019, 14:34:34
  • JustinLonghorn: Kelsey made that decision.
    Jun 13, 2019, 14:34:43
  • advCo: Get a big mixer and a big heavy duty drill. Worth it
    Jun 13, 2019, 14:50:32
  • Nj732port: I am thinking/hoping the exhaust valve is just not closing due to carbon build up from it running rich.... the bike turns/kicks over but there is no compression at all....... I am hoping I just need to unstick the valve but we will see
    Jun 13, 2019, 14:54:20
  • Nj732port: not really sure about how to go about any of this other than kicking the bike over until it frees itself up
    Jun 13, 2019, 14:54:42
  • advCo: tap the top of the valve with a hammer
    Jun 13, 2019, 15:49:44
  • advCo: pull the valve cover and just look at the valves you'll be able to tell if ones sticking open
    Jun 13, 2019, 15:50:03
  • Nj732port: thanks advco
    Jun 13, 2019, 16:05:18
  • Maritime: Yep and you can maybe put some seafoam in to clean the valves out if it is carbon, Check the tappet clearance too they can tighten just enough to get 0 compression as well. I hope though that you didn't have the same issue the virago had with a failed cam and spum cam
    Jun 14, 2019, 10:08:12
  • advCo: Whats up today fellas
    Jun 14, 2019, 11:57:16
  • advCo: The tint for the Raptor Liner is $120 total for what I need. Just found a company that makes bedliner tint for less than half the price. Sweet, now I can afford the color I want
    Jun 14, 2019, 12:08:41
  • Maritime: Nice Nick.  that's always good. Did you figure out the price on some vinyl yet?
    Jun 14, 2019, 12:34:03
  • Jimbonaut: Morning gents, in my latest attempt to fork over mexican all-inclusive holiday funds for motorcycles instead, found this last night - [link]
    Jun 14, 2019, 12:59:19
  • Jimbonaut: Hopefully going to look at it tomorrow
    Jun 14, 2019, 12:59:40
  • Jimbonaut: It's all there minus a left side cover and a dent or two.  Engine's strong and it's a runner
    Jun 14, 2019, 13:00:15
  • Jimbonaut: Sorry Mexico
    Jun 14, 2019, 13:00:34
  • advCo: Ha, Nice.
    Jun 14, 2019, 13:04:11
  • advCo: Mike I'll send you a PM
    Jun 14, 2019, 13:04:27
  • Maritime: Kool.
    Jun 14, 2019, 13:19:54
  • canyoncarver: Well then.....  [link]
    Jun 14, 2019, 13:37:49
  • advCo: Yikes $$$$
    Jun 14, 2019, 13:43:44
  • Maritime: and has original tires WTF?
    Jun 14, 2019, 14:16:26
  • Luugo86: lol  11k
    Jun 14, 2019, 15:23:49
  • advCo: Monday Mornin' fellas
    Jun 17, 2019, 09:23:14
  • SONIC.: Mornin Morning
    Jun 17, 2019, 09:34:45
  • SONIC.: Anybody doing barber this year?
    Jun 17, 2019, 09:34:51
  • Nj732port: kjahbfhb
    Jun 17, 2019, 09:42:46
  • Nj732port: did a leak down and theres air coming from the exhaust valve... kicked a million times to loosen it up but no luck...can i just pull the head and lap the valves to the seat?
    Jun 17, 2019, 09:43:33
  • SONIC.: Yeah, depends on why it's leaking
    Jun 17, 2019, 09:44:56
  • SONIC.: if its just carbon buildup it should be fine, if it's bent you can lap away with no gain
    Jun 17, 2019, 09:45:21
  • Tim: The Vintage Festival has kinda lost its magic for me.  But - the Small Bore looks like a lot of fun in early June.  Might try for that next year.  If I'm down here near Savannah GA in October and have a chance, I might make the drive over but likely will be up in Toronto spending a long weekend at the cottage.
    Jun 17, 2019, 11:17:29
  • Maritime: I go for Kiley's house, not so much for the rest now.
    Jun 17, 2019, 11:46:46
  • Maritime: NJ, did you check your tappet clearances?
    Jun 17, 2019, 11:51:30
  • Maritime: all it takes is a slightly tight valve to give you 0 compression and if it gets tighter you get bent
    Jun 17, 2019, 11:52:09
  • irk miller: The Ace thing has gone a bad way, but most of us have moved into swap spaces that line up back to back, so Barber was a great time last year.
    Jun 17, 2019, 11:52:18
  • Maritime: Yep, just hang with the good folks and ignore the crap
    Jun 17, 2019, 11:52:47
  • Maritime: I hope to be there this year.
    Jun 17, 2019, 11:52:58
  • JustinLonghorn: I go to all of these events for the people.
    Jun 17, 2019, 12:40:24
  • advCo: We MAY fly down for Barber this year, but its going to be so close to our move that we're playing it by ear.
    Jun 17, 2019, 12:46:04
  • advCo: My buddy was just at the small bore meetup, looked pretty fun.
    Jun 17, 2019, 12:46:21
  • SONIC.: Yeah I got a motorhome spot just for the hell of it it can't be all bad lol. We've got a few buddies coming along so it should be fine to hang out if nothing else.
    Jun 17, 2019, 12:46:58
  • Maritime: still the museum and all the bikes you get to see, the feel of the event is getting a little to comercial and about $$$ in some places but you can just not go to those etc.
    Jun 17, 2019, 13:15:28
  • JustinLonghorn: The museum is worth a trip for sure.
    Jun 17, 2019, 14:50:57
  • SONIC.: Yeah i did not opt for ace corner this year
    Jun 17, 2019, 15:28:09
  • SONIC.: My plan is to just bring a very large cooler full of beers, wander around and look at motorcycles
    Jun 17, 2019, 15:29:18
  • advCo: Hopefulyl we can swing it. Pending
    Jun 17, 2019, 15:32:38
  • JustinLonghorn: Hell, seeing your motorhome would be worth the trip
    Jun 17, 2019, 15:41:09
  • Maritime: Yes, I want to fondle the GMC LOL
    Jun 17, 2019, 16:55:41
  • advCo: I'm gonna park the Bus inside the GMC.
    Jun 17, 2019, 17:36:37
  • JustinLonghorn: HA!
    Jun 17, 2019, 17:38:52

* Recent Pictures - click on picture to go to post

Posted by: stroker crazy
Posted by: stroker crazy
Posted by: stroker crazy
Posted by: Rick4004
Posted by: Rick4004
Posted by: Rick4004
Posted by: stroker crazy
Posted by: goodoltup
Posted by: goodoltup
Posted by: goodoltup
Posted by: goodoltup
Posted by: goodoltup
Posted by: goodoltup
Posted by: stroker crazy
Posted by: Rat_ranger
Posted by: Rat_ranger
Posted by: Rat_ranger
Posted by: V10Pilot
june19 006.jpg
Posted by: gt alex
june19 012.jpg
Posted by: gt alex