Recent content by MXSeatPro.com

Michael - Nice job for your first time upholstering a seat.

Alex - There are headlight kits for most popular ATV's that would convert them to LED, but they can be spendy. As for the wiring and voltage spec's, the previous post was correct. Most LED lights, in a sealed housing, are 9-32 Volt. Your ATV puts off 12V so any of them will work and they all run...

Serizawa Tamao - I use what is called a "Topper Pad". Its a fairly dense 1" thick piece that is commonly used in furniture upholstery. I stack qty 2 of them together to reach the height I was after. There's also a few lil tricks to add cush to it so its not too dense, but this will be the base...

I figured the pocket added character and style, and if I was gonna use it I might as well make it functional...Reg, Ins, Beer money, ID, or whatever you'd like it to be. I also used the bottom band of the jacket with its adjusters as the boxing of the seat...On the bike, these will be more...

That is a functional pocket...And no that's the only pic I have of the bike.

Here's a preview of a custom Brat Seat I've completed out of a leather jacket, per the customer's request. This is a brat style seat for a 1971 CB350. Let me know what you think.

Save ur $$$...Read some manuals and get in your garage and fix something. Most MMI grads are morons and are less likely to get hired over a self taught enthusiast that know a his/her stuff. Do it because you love it, not because you're trying to make a living out of it.

TDC is after the exhaust valves have opened and closed. All of your timing marks should aligned at this point. The crank should be very easy to turn. Use a wrench or allen key on the most accessible gear in line with the crank. Usually the flywheel but i dont know this motor well enough to say...

Simplify....Cover the basics. 1. Fuel 2. Compression 3. Spark 4. Timing If each of these is in order this bike should run, pending you put it back together correctly... Buy a Clymer manual and start reading.

I still have some hardware from some mirrors I installed on a bike. Send me a pic and description of the item you need and I'll see if I have it. - Info@MXSeatPro.com

If FastFromthePast dont have them Call http://www.frankmain.qpg.com/

http://www.fastfromthepast.com/servlet/the-Fork-Tubes--dsh--Chrome-cln-Honda/Categories

The axle mount holders are OK but ADC is right with G force and vibration being an issue. Make sure the welds are decent and you use a locking washer and loctite on the bolts to hold your plate. And it is vital that the axle hole is the right size for your model. Any slop could create a...

Check this Rebuild kit out. It includes the rubber plugs mentioned prior. http://www.outwestmotorcycles.com/catalog/index.php?main_page=product_info&products_id=337

The threadless holes you were asking about are supposed to have a rubber plug in it. Not a Jet. A decent rebuild kit should include them.