Search results

  1. N

    Jumping across starter solenoid?

    Problem solved... The solenoid was not grounding properly.
  2. N

    Bike suddenly running rough?!?

    Oh man I wish it was that.... No it is in the on position. I checked the float bowls and the fuel seems pretty clean, maybe a small amount of particles in it. I put an ounce of sea foam in the tank and ran it five min or so I will let it sit until I get off work and then give it another ride to...
  3. N

    Bike suddenly running rough?!?

    Hmmm... I did just fill up at a gas station I have never used before. I will check the fuel from the float bowls. I had wondered if bad fuel was a possibility, but I am generally not that lucky in these type of things. It is usually the most expensive solution to the problem that turns out to...
  4. N

    Bike suddenly running rough?!?

    I got an 81 GS450 around a month ago. It ran ok but had issues with the idle so I had a friend help me clean the carbs. He found that one of the idle jets was plugged and that took care of the running issue. It started running pretty well. I put in around 700-800 miles on it in the last 3 weeks...
  5. N

    Jumping across starter solenoid?

    I have an 81 GS450. The electric starter button stopped working. No click in the relay at all. If I bump start the bike it will work gain, but let it sit for 30 mins no start again... I have eliminated the battery and starter by testing them individually. If I jump across the solenoid posts the...
  6. N

    1982 GS450 Build

    Still would love to see the new mods/updates and the pics of the back end. Question: Was moving to the Hagon Shocks a huge upgrade in the ride from the old stock shocks?
  7. N

    New guy from Kansas City. (81' GS40L with issues)

    Would love suggestions on what bars to put on it. I am thinking DCC Classic handle bars. The original ones are comfy, but not best for tight turns/ steering and the looks are not what I'm after. Gotta be one that are comfortable for longer rides, and not looking to change any cables at the...
  8. N

    New guy from Kansas City. (81' GS40L with issues)

    So I've been lurking for a couple months. I just took the motorcycle safety/riders course this September and got a bike two weeks ago. I had never ridden before so I am a real Noob. I picked up an 81 GS450L. Not the prettiest bike in the world,but it fit my budget. Put a new chain and sprocket...
  9. N

    1982 GS450 Build

    Sorry to revive an old thread. Getting started on my first bike/build whatever. It is an 1981 GS450L. I like the look of your back fender. Any chance I can get some close up pics of it and under the seat look too. Thanks
Back
Top Bottom