Search results

It's a 1976 honda cb360t.

So, I got my tires, tubes, rim guards in and wheels cleaned. Plan was to take it to a shop and have them put them on. Went by a place and the guy said I had to take the sprocket off the rear and the axle out of the front for them to put the tires on. Is this correct? I only ask bc the guy...

I got it squared away. It was a grounding issue, then a short.

I was having some charging issues so I bought what I thought was the rectifier/regulator combo. It is a BBT Small Engine Parts product B16310. It says it fits KOH 4140309. When I ordered it, I thought I was getting the KOH 4140309S. I now fear that I got just the regulator perhaps. I...

Thanks for the advice!

Yeah, that's what mine looks like except with a little black cap on it that keeps it from a full rotation. I'll take a pic and go ahead and pull it off. Thanks!

Very novice question here, I apologize. I've set my idle down to 1300 and want to adjust the fuel/air mix screw. I've read a lot about 1.5-2 turns out as a starting point. However, my screw as a black cap over it with a tab that hits a piece of metal on the carb so you can never get a full...

You mention the cb350, are the rims the same for the cb360? So, you suggest 90/90x18 on front and 100/90x18 on rear? Thanks!

Yeah, I've been reading and it looks like the AM26 might be a good option. 100/90x18 on the front and 110/90x18 on the rear

Just got the bike, tires are going to need replacing pretty soon for it to be road worthy. It has an 18in rim, I'd like to do same size tires on the front and back. What can you tell me about this? Good idea? Also, what brand/size do y'all recommend for a good look and good performance?

Sounds great, I'm right up the road from Converse maybe 2 miles over by Spartanburg High

Thanks for the info on the pods, I'll look up CrazyPJ. I'm in Spartanburg. I'm excited to get it running! It cranked when I bought it so I'm hoping with a little work it will be running smoothly soon and I can get it on the road.

Thanks man! I'll let you know. And JohnGoFast, I appreciate it. I'll have to look up exactly what I am talking about and post a photo and maybe y'all can help me.

War Eagle! I'm not in the area any longer, but in the upstate of the Carolinas. I looked at the anti-gravity but have concerns about adjustments I'll need to make to the electrical system to ensure it stays below 14.8 volts. I was thinking maybe a small AGM? And thanks for the tire...

It didn't come with the stock air box. It had one air pod and the other was missing. It's also going to need some new tires soon. I really like the bigger tire look I've been seeing. Any suggestions in that area from anyone? I know the rims are 18in.

Not the best picture of the bike itself, but all I have right now.

Hello! I just bought the bike in the subject. It is my first bike, and I am quite excited. I'm not completely ignorant to engines, but I am by no means an expert like many of you. I took some things apart yesterday and cleaned the carb. I have to put it back together this evening. I think...