Search results

Wrapping up the 450, but it's still missing a kickstart. The case is machined for a kickstart and the cover has the boss for one, but is it possible to install the kickstart from a 400?

I know most people are waist deep in projects, but what is your current runner for the spring? I'll go first! It's a CL360 built last year.

I thought it would be fun to share some grueling trips on some small cc bikes. I clocked 800 miles on my 360 cafe going to Mid Ohio Vintage days. Spent 2 days riding through rain just missing a tornado. I plan on doing it all again this summer! Here is the bike way overloaded before I set...

I have some more rear hoops! Measures 1" OD, 8.5" wide, 5" legs, and .049" wall. $40 shipped anywhere in the US!

Corny name haha, but I'm really excited for this bike. This was the bike that got me hooked. It was the bike that my friends and I rallied around and mercilessly sliced, diced, and welded with a lack of what some would call skill haha. Nearly 10 years later I was able to drag this guinea pig...

This project is still in its early stages, but I do have it working on a breadboard. I had been kicking around the idea of building an analog style gps speedometer for a while now. Sure you could mount your phone to your triple tree, but sometimes it's nice to have a dedicated piece of...

I made a run of these and thought some of you may be interested. They are great to have around! The tabs are made out of 10 gauge (.134") mild steel and have a 1 inch notch in them to mount flush to most vintage frames. You can also cut them flat to mount parallel with the frame. They are...

The stock connectors have a clear nylon shield that is crimped/melted right bellow the connector. Does any one know where to get this shielding?

Hey I'm heading to Costa Rica next week for work. Seems everyone has a bike down there, but I'd be interested to see if there is any cafe/bobber/custom culture down there. Thanks in advance!

Started piecing together the build today and though I would share with you guys. Background: Picked up this CL360 with a little over 3,000 miles on the clock. The carbs were gummed up and the stator cover had a nice crack in it, but the bike was a great starting point. Did a lot of...

Looking for a motor with good compression in the Chicagoland area. Hit me up if you have anything! Thanks!

I have a couple pairs of super comfortable vintage style deerskin gloves, all are brand new. Looking to get $24 a pair shipped. If interested shoot me a PM or respond here! Let me know if you have any question guys! Thanks!

*UPDATE* I have the kits in my hand and I am now taking orders for CB360 extensions! I have 3 4 inch extension kits and 3 3 inch extension kits. You can purchase them through WrenchTechRacing.com or if you want to do PAYPAL shoot me a pm! $55 Dollars will include all three...

I am looking to upgrade my CB350 light to a H4 housing. Does anyone know the size?

$20 Bux Shipped US I have the main harness for a CB 360. Harness is in great condition so if you are having wiring issues, this may be for you. This harness doesn't include the accessories attached to the harness I.E. rectifier, controls, voltage regulator, ect.

If you have anything let me know! Thanks!

If you have anything let me know! Thanks!

Looking for a clutch actuator in decent condition. Looks like this Thanks for any help!

I'm trying to find the size of the three bearings that ride in the clutch actuator that move it up the ramp mechanism. Anyone have any info? Thanks! They ride in the other side of this part

I'm not new to bikes, but this is my first crash course in cafe racers. I have always loved the look and idea of a stripped down, essentials only motorcycle. I was given this bike 2 years ago and let it sit after having trouble with the carbs. Working on friends bikes and not having a running...