Search results

Re: Re: 1982 gs650g Yea sounds pour I need another person. And yea I'm never buying another Harley. Nothing but a headache. Going British for my next daily driver. Steve

Re: Re: 1982 gs650g The engine is out. Not sure I specified this. I'll see if I can get a buddy to help thoigh. Kinda off subject. I have a 1987 Harley sportster. The chain has rust on it and when I tighten it. It always gets real loose after a ride? Steve

Re: Re: 1982 gs650g Would I need4 of them? Steve

Re: Re: 1982 gs650g Old.

Re: Re: 1982 gs650g Seems like it. Not sure though.

Re: Re: 1982 gs650g Update: after 6 months waiting for it to be in stoct the basket kit and trying to out the engine block together but ran into a problem The piston won't go into the cylinder walls. I oiled it a little no luck. Any advice?

No we actually said they were single filaments earlier in the thread

Okay. the kerosene. Same stuff I can get from a gas station?

Beautiful bikes

Yea they were working fine.. I put the back blinker on first and they were blinking. They only stopped when i took off its counterpart up front.. But good news. My tach light is now working after i made the switch. Weird?

Re: 360 bob with no name New pics page 6 i can't wait to see this in horse.. There was a cafe racer in the most recent one.

Okay well.. Went into my garage today to get on my bike to go to work. And i notce some rust spots on the pice of the eginie i tried to clean... The rust was on the cylinder wall and it just rubbed right off???? i wiped off as much as i could but i was already ruuning late. I tried to used...

Sounds smart What cleaner/degreasers do you recommend? Also. I'm not good with the correct termonlogy. But the part that holds the vavles I should not do a bath with it becasue it will destroy the valves. Right?

The heads are off. Pistons exposed. Never got around to take them out but the rings look fine. Cylinders are in great shape. Probably no need to even do a rebuild... I'm thinking I should just put the engine back toether and then degrease it and paint it and stuff.

Okay need some help..About to just get someone else to do the engine work.. but I am just gonna push through with it I think Just ordered a gasket kit for it.. Should be coming soon About to order a stainless bolt kit Here's my questions. The engine is a greased pile of dirty shit.. Should...

WoW.. beautiful bikes everyone.. I can't get over how clean they are.. I

It definitely sucks.. Was the old blinker switch held in the blinker itself that i removed or in the controls? All i did was cut the wire and wire in my new blinkers.

Okay hooked em up.. got the lights running, but they don't blink.. They just stay lit when i put down the button.. Not a big deal because i can just keep pushing the button but its a pain while I'm turning. any advice.. will take some pics later

Ok well.. not much of an update.. top end is completely apart still Been riding the harley and doing little things on it so i haven't spent anytime on the GS I having the hardest time finding a gasket kit. Whenever i order one i get an email a few days later saying its out of stock. I still...

Aight bought the lights. Now does it matter which wire i hook up to the light and which i ground? if so how can i tell which on is which? Ill post pics up when I'm all done.