Search results

  1. B

    Cb350f rearsets don't clear exhaust

    I mounted mine (cb360) in the same spot, I think the positioning is perfect, regardless of what Roc says. It feels perfect, I'm not running any exhaust and I see it would be an issue if i did run off the headers, but I used to build custom exhausts so I'll likely do a 2-1 off the right and...
  2. B

    Got my Charlie's electronic ignition put on my 360

    like I said, night and day difference...Im happy.
  3. B

    Got my Charlie's electronic ignition put on my 360

    I did move them. That was literally as soon as I hooked it up and started it
  4. B

    Got my Charlie's electronic ignition put on my 360

    Yes on the mechanical advancer. I wanted pamco originally but he wasn't ready and I'm not very patient. I'm super happy with the results. I rode all day and it was the most joyful ride I've had so far on the bike. I'm sure both are great, I can't imagine there are many significant...
  5. B

    Got my Charlie's electronic ignition put on my 360

    So far so good. Rode her to the post office now venturing out further...been sticking close to home just in case...but it's snappy and it's like a new bike. I've got some tuning to do...think I'm running a bit rich but otherwise it's golden. I'll keep things updated as the week progresses and...
  6. B

    Got my Charlie's electronic ignition put on my 360

    No more points!!!!
  7. B

    Got my Charlie's electronic ignition put on my 360

    Lobe it! Damn bike runs like a champ! Kudos. They did however forget my jumper piece but I made one myself. No biggie http://youtu.be/M_Ocb4KWttU
  8. B

    CB 360 Battery Relocation for Pod Filters

    I did something similar. I cut out the stock box, cut off and ground down the tabs and mounted my battery slightly tilted back on the angled pieces with two pieces of aluminum angled rods. No big problems, running pods, waiting on my Charlies ignition to get in today
  9. B

    cb360 timing issue. Have tried for too long to not ask for help

    was it on a sticky or anything? Like I said before, i probably passed right over it...sifting gets so time consuming sometimes and it really just feels defeating, plus bad weather...hopefully gonna take her out for a spin in the morning, then I gotta jet the carbs...tuning it after that I'm...
  10. B

    cb360 timing issue. Have tried for too long to not ask for help

    sun was out today, waited till it cooled off a bit though. Followed your directions and got it going on the first go. thank you for the very direct and simple to follow instructions.
  11. B

    cb360 timing issue. Have tried for too long to not ask for help

    Thanks Herr. It's raining now (has been for weeks) I'm hoping to catch another break in the morning and I hope this works (should) Thanks again!
  12. B

    cb360 timing issue. Have tried for too long to not ask for help

    So I've gone through threads and videos, and I'm a bit stumped. I'm sure its there but the answer may be buried deep in the comments (per usual) and my eyes are missing it. It was running fine before, I had set the points and the bike ran fine for a few months and inevitably it started to idle...
  13. B

    My dads 74 360t, done in my own style after 38 years in a shed

    good ole reddits. Yeah, she never gives me shit for working on it in the front drive and leaving my tools all over the place, I can't start screaming over something that won't fix itself.
  14. B

    My dads 74 360t, done in my own style after 38 years in a shed

    I finally pulled this out after wanting it since 95 (when i first saw it). Have very little in it except a few hundred bucks and some hard work. far from finished but it's getting where I want it. Story: Dad joined the army in 75, stationed in germany in 76, we moved here (Georgia his home)...
Back
Top Bottom