Search results

So when i bought the bike a few months back, the horn barely worked. Then after awhile, when I pressed the horn button, i would hear a "clicking" or "popping" as if it was trying to turn on but there was no sound coming out of it. After that, I had it barely working once more. And now I can't...

Hey folks. I have a '75 CL360 and I'm hearing clicking near the right spark plug. Any ideas? Thanks for the help.

Okay, so this is where I'm at. The bike started today with the electric start- my guess was that the battery was fully charged. I did the Charging system test and these were my results: Battery off: 12.775 V Idling: 12.845 V 4000 RPM: 13.35-13.50 V Starting with Electric Start: 10.42 V With...

Thanks fellas. I'll do this and keep you posted on what I find. Then hopefully I'll be able to tackle the starter issue.

I'm getting a reading of 0.157 That's with the battery fully charged.

Well it looks like I have another problem. I put in a brand new battery yesterday that was fully charged. Started by kicking it no problem. Today, I won't even get a dim light. I'm getting a reading of 1.57 V through the multimeter whereas yesterday I was getting 13-14. Any ideas?

I've tried that. I also put a brand new battery in yesterday because the old one was completely shot..

I'm having an issue with the electric start on my CL360. When I push in the electric start, it turns over, but the bike refuses to start. It'll start on the first kick though. Any ideas?

Perfect! Thank you for the help, alzcbz

Hi All, Does anyone have a good source to buy a crank cover gasket for a CL360/CB360? I'm about to change the oil and it seems like it'd be smart to have one on hand. Thanks in advance

Hi all- please excuse my lack of knowledge regarding this topic. I've purchased a '72 CB500F, all original. I'm looking to upgrade the tire width. What is common practice here? i.e. put wider tires on the current rims, or do I purchase new rims at the same diameter but wider? Also, will I...

Hey everyone, is there anything wrong with buying a seat off of DCC and keeping it black while the tank is a different color? Does anyone have pictures of a bike like this? Opinions wanted!! Thanks all

hahah so it looks like I have my answer. It'll be in my garage very soon 8) can't wait to get rolling on this project!

So I have the chance to pick up a project bike for $250. CL350, titled, No tank, No seat, everything else included and in good shape. New Mikuni carbs. Engine runs well. Yes? No? Maybe?

Great. Thank for all the replies. I'll do the same. Try the stock position and go from There 8)

Hey DTT, new guy here. Been lurking around for quite some time. I'll be getting into a CL350 project bike in the next few weeks. My first order of business is to replace the handlebars. My question is that if I install clip on bars, do I need to reinstall the foot controls/pegs to the back of...