Search results

Hi All, Tried lots of searches but struggling to find exactly what I am after. I am building a Cb360 (and also have some spare Cj360 engine/parts knocking about). I am going to weld up the exhaust myself (a 2-1) but can't find what the stock pipe diameter is for the CB360, does anyone know...

Hi all, I am building a cb360 cafe racer here in the UK. I am using a Yamaha SR rear wheel and the smallest rear sprocket size I can get is 38 so I would like to go up to 18 front to get close to standard ratios. I can find these parts for the standard 530 chain but struggling to find a front...

Hi All, Currently rebuilding a CB360 engine, but also got a couple CJ360 engines sat around that came with the bike when i bought it. Currently at the top end and had a couple of questions. Are the cam shafts the same between the 2 bikes? One of the CJs shafts are in better condition than the...

hi all, I have been stripping down my controls and switches on my cb360. The knob for the kill switch was broken when i got it and need to find a replacement. Does anyone know where I might be able to get hold of one? Cheers

Hi Guys, I have been rebuilding my CB360 engine, and as part of that I have painted it all up. I have painted it using the VHT engine enamel, and have just baked it as recommended. As i took them out I noticed the liners were completely loose (I guess the ally case expands more than the steel...

Hi Guys, Looking for a bit of inspiration regarding handlbar controls and levers etc. I'm building a CB360 cafe racer style bike, and have got clip-ons. I am trying to find a nice clean solution for throttle cable, brake levers and electrical controls all in one package. It will also need to...

Hi guys, I brought a project bike a while a go which came with a set of yamaha wheels. I was told the wheel were off an XS of some kind. Hvaing looked around, i believe the front wheel is from an XS400 so no problem there. I assumed then that the rear would be from a xs400 as well, but having...

Hi Guys, I realise I might annoy people by asking this, as I imagine it has been covered many times before. I am rebuilding a CB360 engine and I just want to make sure I get it right and don't miss anything. I have searched through the forum and general google search and have found a few things...

Hi All, i recently bought a CJ360 with a big box of spare parts. It came with a set of XS400 wheels, and front forks. as well as the original front end of the CJ. I want to use the XS front end (like the look of the wheel, and disc rather than drum), and it slides right in to the CJ triple...

Hi Guys, New to this forum, and new to bike building so here goes! Bit about me, Ive ridden bikes for the last ten years or so (since i was 12/13) And have owned a bike nearly constantly since then, but now fancy having a go at building a cafe sytle bike. I bought a box of bits from someone on...