Search results

So the selection of pod filters for the cb500/550 is limited. K&N makes a set, but they cost around $200 http://www.knfilters.com/search/product.aspx?prod=rc-0844 When i took a look at their specs, they were 3"O.D. with a 2" height. Fortunate for the cb500/550 the size of the flange needed...

Time for some spring cleaning. I've got a couple jackets for the smaller guys (tags marked 36-38" chest) and a few for the bigger guys (44" and XXL). All measurements with the jackets are taken as follows: Chest: Taken from armpit to armpit laid flat with the jacket pulled tight...

Rebuilding some carbs from a pile of parts, and the only pieces I'm left needing are 3 of the pivot pins that slide through to hold the float assembly together, and 3 float bowl screws (the ones on the bottom of the bowl to drain the fuel). If anyone had some of these pieces that they'd be...

Yeah, it's an ad for google, but it's a damn good ad. http://www.youtube.com/watch?v=V4DDt30Aat4

http://saskatchewan.kijiji.ca/c-cars-vehicles-motorcycles-other-Vintage-Wassell-fuel-tank-W0QQAdIdZ348567615 just saw this posted. looks like a helluva deal if you're in the market for one.

i'm looking for something cheap. condition isn't too important as it's going to be chopped up and pieced together to fab something custom. i don't need the mufflers. any 2-1 merges would be helpful. i'm located in regina, saskatchewan, canada. let me know if you've got anything!

i was digging though a box of parts and came across a power commander iii for a ducati 999. every bike i own is carb'd so it's useless to me, but i'm slowly dreaming up a EFI conversion for some point in the future. i've done a bit of looking around and my best guess is that all of the units are...

I'm looking to begin gathering parts to fab an exhaust for my cb550/4 and am wondering if anyone has done their own before and could offer me some suggestions. My biggest concern is the mating of the exhaust port to the header. I've been looking at the yoshimura repro pipe at...

...and i figured maybe us on DTT could do our part to help raise some awareness and funds for mens health. I started a team for everyone if you're interested in joining - http://mobro.co/dttdirtlips To join, just go to the page, click "join my team" and sign your life away. This should be a...

So i picked up a frame, tank, couple wheels, engine, a few partial racks of carbs and a "parts bike" (aka frame with wheel) for way too much money - but i just had to have it. The frame is some kinda production from the 70'. I also tacked together a dual disk front end using some spare parts...

When i picked up my hardtail project a few random wheels were incuded: 2-21" and 1-16" which i picked up strictly because they were 40 hole rims that i was planning on lacing onto my stock honda hubs via some custom spokes. Now, as it turns out the rear wheel has a stock 20mm axel diameter so...

These jackets are both in awesome condition, and i wear them on an almost daily basis. The only reason for selling is because i want to start a patch-jacket and feel like these would be disrespected by doing so. And i need some more cash for school.. There are tons more photos on imageshack...

This jacket is a pretty deep brown in colour. There is a pretty decent weight insulation sewn into the jacket. All zippers work perfectly and the leather is still rigid and waiting to be worn in. The only issue is a bit of scratching on the right elbow (can be seen in the second photo). The...

I'm looking for a tank like this. Preferably in chrome. Let me know if you've got one!

Like it says, I'm looking for the rear wheel off a CB750 (or any 16" wheel with a 20mm axle). Must have spokes and a drum brake. I'm in Canada, so if i could find one here and avoid international shipping it would be much prefered.

currently i'm riding a 72 cb500/4 with stock brakes and standard tires and can lock both the front brake (disc) and the rear brake (drum) if i feel like it. if my logic is correct, this would mean that i have reached the maximum stopping power possible out of this set up. right? dual discs...

Looking for a left side cover in top-notch shape. Emblem is not important, nor is colour.

So there seem to be 3 different kinds of pod filters from what i have seen: Paper (K&N) Foam (Uni) and Metal/Mesh (Emgo) Just wondering who has used which and what their experiences have been? I'm looking to run the pods on a cb500/4 with stock carbs, so I understand the bike won't...

This one is for the small guys! Up for sale is a nice black leather jacket made by Drospo in Canada. Jacket has nice padding in the shoudlers, elbows, and lower back. Heavy, soft leather and a lightly insulated liner. Side panels of the jacket are ribbed to allow some stretch. Small pocket on...

It's not funny, it's not sexy, it's just true. Doing some research for a lesson plan about advertisers messing with children's minds and came across this video. I think this does a nice job of stating the facts. Dove - Evolution Commercial (higher quality)