jeffw
Been Around the Block
This is a sort of introduction and my build of bike I bought this last spring. Winter is in full force and that means its time to do a full strip and rebuild of my bike. I did some cosmetic work and upgraded some parts as the year went, nothing that kept me down more than a day or two. I will post pictures later of the current state of the build and progress as I work through it.
Before
After
http://youtu.be/WZC6vY0wngg
Here is a list of stuff done so far
1. Wiring Mod for Coils
2. Dyna Coils & Wires
3. KZ electronic ignition
4. Cafe Seat
5. Tailight Assembly
6. Air Pods
7. V&H Exhaust
8. New Throttly Assembly
9. Polished Tank & Painted Emblems
10. New Battlax Tires
11. Rebuilt Carbs
12. Electronic Voltage Regulator/Rectifier
Here is a list of stuff I plan to do
1. Grind and Cut n/a tabs on the frame
2. Sand Blast frame and misc parts for powder coating
3. Minor Rebuild of Engine (Leak down test and and valve work if necessary)
3a. Paint Engine
4. Clean up Wiring Connections (CWS Wiring Goodies)
5. New Sealed Battery
6. Rebuild Forks (Seals are Leaking)
7. New Master Brake Cylinder & Clutch Perch
8. Digital Acewell Gauge
9. Paint Spokes on Wheels
10. New Right Hand Control
11. New Brake Lines
12. Rear Shocks
13. Dual Front Brakes
14. Fork Brace (Either No Front Fender or Black one from DimeCity)
15. Redo the Seat
Here is rough MS paint view of what it might look like, haven't decided yet what I want to paint black and what to polish.
Before
After
http://youtu.be/WZC6vY0wngg
Here is a list of stuff done so far
1. Wiring Mod for Coils
2. Dyna Coils & Wires
3. KZ electronic ignition
4. Cafe Seat
5. Tailight Assembly
6. Air Pods
7. V&H Exhaust
8. New Throttly Assembly
9. Polished Tank & Painted Emblems
10. New Battlax Tires
11. Rebuilt Carbs
12. Electronic Voltage Regulator/Rectifier
Here is a list of stuff I plan to do
1. Grind and Cut n/a tabs on the frame
2. Sand Blast frame and misc parts for powder coating
3. Minor Rebuild of Engine (Leak down test and and valve work if necessary)
3a. Paint Engine
4. Clean up Wiring Connections (CWS Wiring Goodies)
5. New Sealed Battery
6. Rebuild Forks (Seals are Leaking)
7. New Master Brake Cylinder & Clutch Perch
8. Digital Acewell Gauge
9. Paint Spokes on Wheels
10. New Right Hand Control
11. New Brake Lines
12. Rear Shocks
13. Dual Front Brakes
14. Fork Brace (Either No Front Fender or Black one from DimeCity)
15. Redo the Seat
Here is rough MS paint view of what it might look like, haven't decided yet what I want to paint black and what to polish.