Bultaco Bandit El Montadero 360
- Thread starter Texasstar
- Start date
Re: The Count Mount Zeke's El Montadero 360
that is super coool !! start searching images ''expansion chamber vintage '' ,bassani,jardine,wirges,webco, my memory just fell off the cliff but there are others,that is an exciting find ! wow i cant really git over how vcool it is yall found that ;D where is the jumping up and down clapping smilie ??
proly should freshen up the packing
that is super coool !! start searching images ''expansion chamber vintage '' ,bassani,jardine,wirges,webco, my memory just fell off the cliff but there are others,that is an exciting find ! wow i cant really git over how vcool it is yall found that ;D where is the jumping up and down clapping smilie ??
proly should freshen up the packing
Re: The Count Mount Zeke's El Montadero 360
i had nearly the identical pipe but built to fit the 1968 yahama DT1 RT1 enduros,.i never new its maker brand neather
it had the same wire made heat shielding .....from memory it was only a very few or just one mfg that used the wire like that
i had nearly the identical pipe but built to fit the 1968 yahama DT1 RT1 enduros,.i never new its maker brand neather
it had the same wire made heat shielding .....from memory it was only a very few or just one mfg that used the wire like that
Texasstar
Can't is a four letter dirty word
Re: The Count Mount Zeke's El Montadero 360
Sent from my iPhone using Tapatalk
what packing lol! This is going to be fun! We have the stock pipe and now this torque monster! Want to build a road racing pipe for grins...and I know where we can get a bandido expansion chamber.xb33bsa said:
Sent from my iPhone using Tapatalk
Texasstar
Can't is a four letter dirty word
Re: The Count Mount Zeke's El Montadero 360
Now how do we pack this thing?
Sent from my iPhone using Tapatalk
wow they do look like the same manufacturer! I was looking for the header for the m51 and called up Lynn and he had an M70 header. Called me back about 10 minutes later and said I have this expansion chamber scrambler hanging next to the M70 header that is for an M51! Bought it sight unseen. Didn't even ask the condition. Call us Lucky!xb33bsa said:
Now how do we pack this thing?
Sent from my iPhone using Tapatalk
Texasstar
Can't is a four letter dirty word
Re: The Count Mount Zeke's El Montadero 360
Do you really want to know about expansion chambers by Gordon Jennings. Part 2 is very interesting.
Jennings put the stock Yamaha DT-1 on the dyno and it only delivered 15.86 hp of the advertised 21 bhp.
Jennings expansion chamber pipe, Webco Head, ported, and shortened piston 45% increase in power over the stock to 22 Also tested vintage expansion chamber pipes with the Webco head: "The Hooker expansion chamber delivered 19.36 bhp, at 7000 rpm. Torque Engineering's chamber came in with 19.49 bhp, also at 7000 rpm; the MCM chamber gave us 18.10 bhp @ 6500 rpm; and the Strader Engineering chamber, 18.93 bhp @ 7000 rpm. We also tried the Yamaha GYT- kit and MX expansion chambers,gave 19.79 and 19.36 bhp, respectively- both at 6500 rpm."
http://www.bridgestonemotorcycle.com/documents/do_you_really6.pdf
Do you really want to know about expansion chambers by Gordon Jennings. Part 2 is very interesting.
Jennings put the stock Yamaha DT-1 on the dyno and it only delivered 15.86 hp of the advertised 21 bhp.
Jennings expansion chamber pipe, Webco Head, ported, and shortened piston 45% increase in power over the stock to 22 Also tested vintage expansion chamber pipes with the Webco head: "The Hooker expansion chamber delivered 19.36 bhp, at 7000 rpm. Torque Engineering's chamber came in with 19.49 bhp, also at 7000 rpm; the MCM chamber gave us 18.10 bhp @ 6500 rpm; and the Strader Engineering chamber, 18.93 bhp @ 7000 rpm. We also tried the Yamaha GYT- kit and MX expansion chambers,gave 19.79 and 19.36 bhp, respectively- both at 6500 rpm."
http://www.bridgestonemotorcycle.com/documents/do_you_really6.pdf
Texasstar
Can't is a four letter dirty word
Texasstar
Can't is a four letter dirty word
The Count Mount Zeke's El Montadero 360
The interesting part is what all the aftermarket pipes did to the Yamaha stock head. Talk about blowing up engines!
Also it is so important to have the right amount of Squish in your life
Sent from my iPhone using Tapatalk
well Yamaha sure did...very interesting article on the "optimization" of the expansion chamber. Going to dissect this the Bultaco pipe and look at it compared to Jennings calculations and get a hold of the bandido and compare it. Also we are going to the Dyno and compare all three.xb33bsa said:
The interesting part is what all the aftermarket pipes did to the Yamaha stock head. Talk about blowing up engines!
Also it is so important to have the right amount of Squish in your life
Sent from my iPhone using Tapatalk
Texasstar
Can't is a four letter dirty word
Re: The Count Mount Zeke's El Montadero 360
Sent from my iPhone using Tapatalk
called Lynn Mobley about ours and he said he thought it was made by Graham Sheet Metal. He said he sold a lot of there product from his Bultaco dealership in California. I found a Graham Sheet Metal and Motorcycle Accessories that was in business in North Hollywood California starting in 1972. http://www.corporationwiki.com/California/North-Hollywood/graham-sheet-metal-motorcycle-accessories-inc/39871374.aspxxb33bsa said:
Sent from my iPhone using Tapatalk
Re: The Count Mount Zeke's El Montadero 360
Anyone that's ever served in the Navy knows plenty about Nevr-dull. I polished mucho engine room brass during my greenie days in the Navy with that stuff.Texasstar said:Learned this from an old timer out at the Pate Swapmeet he was polishing aluminum wheels gonna give it a try Neverdull cloth with Mothers. We used Mothers all the time.
Sent from my iPhone using Tapatalk
