CB450 Build "Well It's About Time"

[Finnigan]

Definitely can get you the list but there are a few items that had the wrong thread size so I have a lot of unused hardware. I'd say ~10-20% were extras and therefore a waste of money. The ones that were useless were the larger sizes like M8's M10's and M12's (nuts and bolts) but if you delete those from the list you've got the vast majority of what you need. Not to say that I haven't ran to the hardware store for an extra bag of M6's from time to time :

4 pieces #6416 - Metric socket cap
1.0mm x 10mm

3 pieces #6419 - Metric socket cap
1.0mm x 20mm

16 pieces #6420 - Metric socket cap
1.0mm x 25mm

31 pieces #6421 - Metric socket cap
1.0mm x 30mm

4 pieces #6423 - Metric socket cap
1.0mm x 40mm

1 piece #6424 - Metric socket cap
1.0mm x 45mm

5 pieces #6428 - Metric socket cap
1.0mm x 65mm

4 pieces #6430 - Metric socket cap
1.0mm x 80mm

2 pieces #6459 - Metric socket cap
1.0mm x 90mm

1 piece #6441 - Metric socket cap
1.25mm x 55mm

2 pieces #6435 - Metric socket cap
1.25mm x 25mm

5 pieces #6437 - Metric socket cap
1.25mm x 35mm

2 pieces #6438 - Metric socket cap
1.25mm x 40mm

1 piece #6440 - Metric socket cap
1.25mm x 50mm

2 pieces #6442 - Metric socket cap
1.25mm x 60mm

1 piece #6443 - Metric socket cap
1.25mm x 65mm

3 pieces #6444 - Metric socket cap
1.25mm x 70mm

2 pieces #6447 - Metric socket cap
1.25mm x 90mm

4 pieces #6451 - Metric socket cap
1.25mm x 130mm

4 pieces #6467 - Metric socket cap
1.5mm x 35mm

2 pieces #6468 - Metric socket cap
1.5mm x 40mm

4 pieces #6477 - Metric socket cap
1.5mm x 90mm

5 pieces #6689 - Metric socket flat head
x 1.0mm x 25mm

4 pieces #6677 - Metric socket flat head
x 0.8mm x 25mm

3 pieces #6675 - Metric socket flat head
x 0.8mm x 16mm

3 pieces #6693 - Metric socket flat head
x 1.0mm x 45mm

3 pieces #6688 - Metric socket flat head
x 1.0mm x 20mm

1 piece #6377 - Metric socket cap
0.5mm x 5mm

6 pieces #6407 - Metric socket cap
0.8mm x 10mm

1 piece #14652 - Cotter pins

13 pieces #4813 - Metric lock washers

4 pieces #4811 - Metric lock washers

12 pieces #4812 - Metric lock washers

1 piece #4810 - Metric lock washers

3 pieces #4817 - Metric lock washers

5 pieces #4513 - Metric flat washers

5 pieces #4514 - Metric flat washers

10 pieces #4515 - Metric flat washers

75 pieces #4516 - Metric flat washers

35 pieces #4518 - Metric flat washers

15 pieces #4519 - Metric flat washers

5 pieces #4520 - Metric flat washers

8 pieces #10322 - Metric cap nuts
10mm x 1.5mm

5 pieces #4773 - Metric hex nuts
0.5mm

5 pieces #4775 - Metric hex nuts
0.8mm

20 pieces #4776 - Metric hex nuts
1.0mm

35 pieces #4778 - Metric hex nuts
1.25mm

15 pieces #4779 - Metric hex nuts
1.5mm

5 pieces #4780 - Metric hex nuts
1.75mm

3 pieces #4781 - Metric hex nuts
2.0mm

 

[mpower]

Cool thanks Finnigan! I appreciate it!

Any chance to see some photos of how you mounted your rear fender?

 

[Finnigan]

So the rear fender, its held in place by the original rubber to keep it rattling, its chopped in half and held under the seat pan by a long bolt and rubber washer combo which I decided today is also going to hold my RR combo For an added measure I drilled a few holes and safety wired the whole thing on the cross member near the original rubber holders. Hope you can see details in the pic below. If not I'll try and get you better ones.

 

[Finnigan]

Finally got a drill press in my little shop, its been one of those tools that I never thought I'd use as much as I do and its only been a day! Fixed up the gauge after letting go of the fact it was going to be next to useless in the headlight so low down.

 

[mpower]

So the rear fender, its held in place by the original rubber to keep it rattling, its chopped in half and held under the seat pan by a long bolt and rubber washer combo which I decided today is also going to hold my RR combo For an added measure I drilled a few holes and safety wired the whole thing on the cross member near the original rubber holders. Hope you can see details in the pic below. If not I'll try and get you better ones.

Thanks for sharing that Finnigan.

 

[Finnigan]

Anytime

 

[smarsh]

Any updates or progress on the build Finnigan?