J-Rod's 82 CB750- AKA Giselle
- Thread starter J-Rod10
- Start date
BurdetteDR
Junkyard crawler
Re: 1982 CB750K DOHC Monoshock, SSSA, USD Front, Bar Hopper.
Both of those bikes are pure sex
Both of those bikes are pure sex
Tune-A-Fish
BOTM LOSER Proudly Deplorable
Re: 1982 CB750K DOHC Monoshock, SSSA, USD Front, Bar Hopper.
In MX 250 2 stroke competes in the 450 4 stroke races, not so much at Nationals, but regionals and at Lorettas this year lots of 2 smokin going on.
grandpaul said:
In MX 250 2 stroke competes in the 450 4 stroke races, not so much at Nationals, but regionals and at Lorettas this year lots of 2 smokin going on.
Re: 1982 CB750K DOHC Monoshock, SSSA, USD Front, Bar Hopper.
Getting some saddle time in today. Rides well, turns better than expected. Wheelbase is 1.250" longer than stock. Sounds great, moderately comfortable. I'd have no problem hopping on and doing 3-400 miles. Doing it this next weekend.
Getting some saddle time in today. Rides well, turns better than expected. Wheelbase is 1.250" longer than stock. Sounds great, moderately comfortable. I'd have no problem hopping on and doing 3-400 miles. Doing it this next weekend.
Tune-A-Fish
BOTM LOSER Proudly Deplorable
Re: 1982 CB750K DOHC Monoshock, SSSA, USD Front, Bar Hopper.
Good to hear, I'm rolling mine out with 4.5" of extension, but have another same swinger shortened for stock wb sucked in and 2" of adjustment so could be in the +1" zone depending on chain stretch.
2nd the banner picks, wish it would wait a month, I think there will be several CB750's roll out next month.
Good to hear, I'm rolling mine out with 4.5" of extension, but have another same swinger shortened for stock wb sucked in and 2" of adjustment so could be in the +1" zone depending on chain stretch.
2nd the banner picks, wish it would wait a month, I think there will be several CB750's roll out next month.
redwillissuperman
Keep it simple- engine, wheels, bars
Re: 1982 CB750K DOHC Monoshock, SSSA, USD Front, Bar Hopper.
More pictures would be great. I have almost the exact same bike.
More pictures would be great. I have almost the exact same bike.
Re: 1982 CB750K DOHC Monoshock, SSSA, USD Front, Bar Hopper.
Same to you, X.
Red, I'll try to snap some more. Have been busy riding her, getting some kinks worked out. Have put right about 500 miles on here in the last couple days. Try to do another 500 by Friday, polish her up, and head to Bikes, Blues, and BBQ. Expecting half a million bikes on The Hill this year.
Same to you, X.
Red, I'll try to snap some more. Have been busy riding her, getting some kinks worked out. Have put right about 500 miles on here in the last couple days. Try to do another 500 by Friday, polish her up, and head to Bikes, Blues, and BBQ. Expecting half a million bikes on The Hill this year.
Re: 1982 CB750K DOHC Monoshock, SSSA, USD Front, Bar Hopper.
Still adding bits and pieces here and there.
True what they say, never finished.
Little billet cap to close the axle up.
Closed off the back of the seat with a piece of alloy sheet I had left over.
Billet reservoir caps front and back. Going to turn some billet reservoirs when I have the time.
Ignition cover had some scratches in her, turned a new one of those too.
Still adding bits and pieces here and there.
True what they say, never finished.
Little billet cap to close the axle up.
Closed off the back of the seat with a piece of alloy sheet I had left over.
Billet reservoir caps front and back. Going to turn some billet reservoirs when I have the time.
Ignition cover had some scratches in her, turned a new one of those too.
redwillissuperman
Keep it simple- engine, wheels, bars
Re: 1982 CB750K DOHC Monoshock, SSSA, USD Front, Bar Hopper.
Update?
Update?
Re: 1982 CB750K DOHC Monoshock, SSSA, USD Front, Bar Hopper.
Built a couple brackets to brace my carbs.
The new insulators I bought for the head seem super soft, so, I eliminated the movement. Synced the carbs, and back to roaring she is.
I am ridiculously happy with Murray's carbs system. It pretty damn solid.
Built a couple brackets to brace my carbs.
The new insulators I bought for the head seem super soft, so, I eliminated the movement. Synced the carbs, and back to roaring she is.
I am ridiculously happy with Murray's carbs system. It pretty damn solid.
