Hey Pat,
Sorry man didn't mean to get testy. I built the motor and intake about 10 years ago. The motor is a 2.0L ABA block like what your using with a 16V head. It was more of a challenge because a whole bunch of people told me it couldn't be done using stock Motronic managment. So I proved them all worng and made a ton of hp doing it. The motor is super reliable and runs like a top but very very violent which makes it a workout to drive. Yes there are 2 fuel rails one runs the stock injectors for the motronic sysyem and the second rail is run by as SDS controller.
The hard part was getting the Motronic to recognize the 16V dist and took alot of internal modifying to make it work, there were also some oil galleries and coolant lines that needed to be modified, but it works well now.
I'm just one of thoes guys that if you present me a challenge and tell me it cannot be done I'll do everting in my power to prove you wrong.
D.