crimson ghost said:Sent you an email for CB200.I have no bike like this in my shop so I could do a off site setup for you.rabbitgti said:Yes shaft drive
I will send you a set of frame clamp on to clamp to the frame and to mount the rearset. Also in this package, there are gear lever and brake shaft lever. You mount them to the bike and measure the rod length you want. I will send the rods later. To do so, please measure the OD of gear shaft and brake shaft (brake shaft laying between passenger peg and driver peg where brake pedal attached to)
The total price for the first pack is 115 shipped and second is 35 shipped.
Thanks
I believe i could make one. Please measure the gear shift shaft OD+ distance from mounting hole to the gear shaft. Photo on the brake side. I will pm you when you have these inforabbitgti said:Green screwdriver is approx. location
I will make with your helpwilliam.objective said:how about fitting on a cb750f 77?
Viet said:I have made a set for KZ440 but not sure it is the same for KZ200. Will pm you in few day research
Thanks
Hi,mikewerx said:Hi Viet,
Still haven't mounted up the set you sold me and dropped off at my friend's hotel in HCM city, but now looking for a rear set for a '77 Yamaha XS750. Do you make these? Also, do you have other material or finish options, such as powder coating or electroplating? Looking for either matte black or brass. Thanks
Yeah we have. The set is 120 shipped to the US with folding pegs.Ryguy6183 said:Hello Viet,
I'm looking for a complete set for a CL175. Do you have these available?
Thanks
Sorry that I could not send you a photo of the other side but sure it fit. I lost my ipad with all photos and sold the bike a time ago. but all measurement is recorded.Runningdog said:Hello, Viet,
Looks like you're creating quite the industry with rearsets, tanks, seats, etc.....good on yah.
I see from the photos in the forum that you can fit a '78 xs400, using a bracket. The one photo shows the brake side, good fit. I cannot find a photo for fitting the bracket on the shifter side, as a gusset is within the "v" of the frame at the obvious mounting area.
Nonetheless, I would like to get a complete kit for my bike, with brackets and rods. Price quoted for other applications looks good. I'm in British Columbia, Canada.
Cheers.
Oh yeah, My bike is prepared for cafe racer, all gusset is cut off for a clean frameRunningdog said:Hello, Viet,
Looks like you're creating quite the industry with rearsets, tanks, seats, etc.....good on yah.
I see from the photos in the forum that you can fit a '78 xs400, using a bracket. The one photo shows the brake side, good fit. I cannot find a photo for fitting the bracket on the shifter side, as a gusset is within the "v" of the frame at the obvious mounting area.
Nonetheless, I would like to get a complete kit for my bike, with brackets and rods. Price quoted for other applications looks good. I'm in British Columbia, Canada.
Cheers.