No. We used Lucky as an engine tester. We can break this motor in as we finish the 175 chassis or as Zeke said, "Dad can we work on the aesthetics now? Lolxb33bsa said:CONGRATULATIONS !!! i am confused does this bike get the dustbin ?
Texasstar said:No. We used Lucky as an engine tester. We can break this motor in as we finish the 175 chassis or as Zeke said, "Dad can we work on the aesthetics now? Lol
Lucky's electronic were plug and play we just had to swap out the upper mount from the 175. We can also dial this engine in on the Dyno with Lucky with the superhawk carbs. Our drop dead date for Bostrom Brothers to ride WOT is September 16.
Sent from my iPhone using Tapatalk
thanks brotherJoon-yah Bourelle said:Congrats and it sounds great!!!
so when our lash was set at .006 our valves were opening at 15 btdc and with no lash they opened earlier at 28 btdc?crazypj said:Extra valve clearance makes the valve open later not earlier
Thanks Crazypj for everything we really appreciate you!crazypj said:Yep, you take up the clearance before valve starts to move
If you set at 28deg btdc zero clearance, with 0.006" clearance valve really opens at 15 deg which is a later opening (closer to TDC)
yes that is a 200 plug thanks Teazer did you see the start up?teazer said:That long reach plug came out of a 200 head yes? 160-175 have short reach plugs - just a reminder if or when you try other heads. That is def way rich.
I think you know me well however this was symbolic as a picture for my son someday how the old gives birth to the new...that a wise man listens to the wisdom that went before him. I also want to show the 3RM bike how it's done...just kiddin' JOON ya! Of course that was a 360! One of my smart arse friends said, "What are you gonna do haul another bike to start it?"teazer said:I did indeed. It sounded good. 2 bikes and two people to start one bike - now that's overthinking things