Yes another but all mine 75 CB360 Build

[Toyotacrawler]

thanks bubba thats all I needed to know..BTW they do offer similar ones in 12vdc

http://www.radioshack.com/12-volt-green-snap-in-lamp-assembly-with-bulb-2-pack/2720337.html#start=6

Oh wow those are cool. I didn't see those before. Sweet find!

 

[crazypj]

I think those use actual bulbs rather than LED?
It would be easy enough to convert them though, just get a bag of 3~5mm LED's and resistors to match

 

[Toyotacrawler]

I think those use actual bulbs rather than LED?
It would be easy enough to convert them though, just get a bag of 3~5mm LED's and resistors to match

You are correct. Those in the link above are bulbs. These are the ones that I bought. http://www.radioshack.com/green-led-with-holder/2760271.html#.VOJF7y7kcWM

 

[Toyotacrawler]

Now that I have my hoop welded on I'm deciding on a seat design. A few pages back i sketched up a prelim but now that I have the hoop on my actual bike I can get a better idea.
I think I'm happy with the look pictured below. But I'm sure it will be tweaked once I've cut, shaved and sanded some foam. Feedback appreciated

 

[plagrone]

Yes, very nice shape

 

[Toyotacrawler]

Yes, very nice shape

Thanks man! How's your 360 doing?

 

[RR100]

That is beautifully balanced aesthetically. You could hang it on the wall. Nice

R

 

[Toyotacrawler]

Thanks for the complement I appreciate it. Now if I can only get the final product close I'll be doing good.

 

[Toyotacrawler]

I managed to do a little work today. Signals mounted and considering options for the battery location. I plan on 1 inch longer shocks than stock so clearance shouldn't be an issue.

 

[Toyotacrawler]

I'm going to go with this Antigravity Small Case 4-Cell 120CA Lithium Ion Battery. I was told back in October at the Vintage Festival that it would do just fine.
I really like its small size and adhesive foamed back.

 

[xb33bsa]

looksa sweet man !!!!!!! ;D
but get the shocks you will be using and check the clearance before you go further lotsa fellers wish they had :-[ :-\ ;D

 

[Toyotacrawler]

Thanks! ;D
I agree with you on the shocks. I need to get them on order soon!!!!

 

[settintrendz]

^^^ I agree 100%^^^
A lot of people are so eager to make "sweet mods" that they neglect to address more important things, like suspension design/ geometry/ clearances. Don't make that mistake.

That said... Looks awesome. Keep it up

 

[xb33bsa]

Thanks! ;D
I agree with you on the shocks. I need to get them on order soon!!!!

whatya lookin at fer length ? i have some 13-3/8 " eye to clevis konis available

 

[Toyotacrawler]

^^^ I agree 100%^^^
A lot of people are so eager to make "sweet mods" that they neglect to address more important things, like suspension design/ geometry/ clearances. Don't make that mistake.

That said... Looks awesome. Keep it up

Thanks!

whatya lookin at fer length ? i have some 13-3/8 " eye to clevis konis available

I was leaning towards the 13" black ones that Brenden sells over at Common Motor. 3/8" longer would just give me more clearance. Do you have a pic of said shocks?

 

[xb33bsa]

this is how i got them,great condition with rusty springs
i have lighter springs which you would need anyway...300 shipped with fresh oil and new shaft seals if needed
they have 4 poisition damping adjuster ...if you really want an improvement ....100 doller fitzall shocks are a joke

 

[Toyotacrawler]

this is how i got them,great condition with rusty springs
i have lighter springs which you would need anyway...300 shipped with fresh oil and new shaft seals if needed
they have 4 poisition damping adjuster ...if you really want an improvement ....100 doller fitzall shocks are a joke

I'll think about it. It's tax season and the government wants more than they've already taken which has put a ridiculous dent in funding for my project. I'm almost out of parts though

How much of a job would it be for me to clean those up and have them powder coated? Would this be possible with those?

 

[xb33bsa]

you mean the bodies ? powder coat the nice alloy bodies ?

 

[crazypj]

Have springs sand blasted and powder coated, shine up the bodies.
I've got a pair of Koni's like that but springs ain't rusty, I've refused to sell them despite several pretty decent offers, eventually they will end up on one of my 360's 8)

 

[Toyotacrawler]

you mean the bodies ? powder coat the nice alloy bodies ?

Well I'm going for a matte black and red look with as little shiny as possible. But I do like PJ's quote below.

Have springs sand blasted and powder coated, shine up the bodies.
I've got a pair of Koni's like that but springs ain't rusty, I've refused to sell them despite several pretty decent offers, eventually they will end up on one of my 360's 8)

I like this plan. From what I've seen searching images this is pretty sharp 8)