Search results

Glad I could help you out with the cable. Thanks for the info and I will updating the listing to show fitment of the CL450 also. This may be a case where the CL cable was an inch longer or shorter than the CB cable so Honda used a new part number. For anyone else looking you can also find them...

High quality stainless steel bar end mirrors. Fully adjustable. 3" and 4" round mirrors. Great looking goggles in a couple of different styles. Halcyon products are made in England and proudly display that fact. More info at http://www.scramblercycle.com/halcyon.html

You probably haven't heard of Heidenau in the US but they have been around for quite a while in Europe. These are German made tires. Heidenau offers tires specifically made for vintage bikes. Correct sizes and tread patterns that look the part. Need tires for your CB350? How about something...

Munch Mammoth.

Happens all the time. If you ever go to a swap meet 75% of the bikes for sale that have titles will probably be in a different person's name. I have titled bikes with a title that looked like it might have been signed off 35 years ago, never had a problem as long as I have the title with some...

I would have agreed with your $25,000 sandcast price until this just happened.... http://search.ebay.com/330450965682

Fun stuff.

I had some of these made up because I was having a hard time finding some. They are vinyl. Perfect for use on your helmet, windshield, or where ever you want. The large are about 5" dia and the small about 3". $5 gets you a pair of the large and a pair of the small. All that you see in the...

I found this bit of info a while back. Fiberglass Special care must be used when dealing with classic fiberglass tanks made using polyester resins such as the ones on Norton, BSA and other British motorcycles. Modern fuel oxygenates (esters, alcohols and ethers) added to all current fuels do a...

I guess that seems to be a common problem.

Your best bet is going to be finding a complete front end with forks, triple trees, brakes, and wheel. Press out the stem on what you find. Use the stem from the CL and press it into the lower triple. http://www.ohiocaferacers.com/gsxrcb.html

Still the same way as what you see in that picture. Waiting for warmer days to get it painted. Then it should be done.

What a CB750 looks like with a Read-Titan fairing. Dick's Cycle West seat and tank.... My bike. Others.........

The CB650's aren't a bad bike. Its CDI ignition so it doesn't have points. I had one for about 5 years, then sold it to a friend, and now he sold it last year. Cb750 wont fit in there. CaptBlood is right though, not much stuff out there for these bikes like the other CB's.

That setup came stock on my Honda Dream. Works pretty good. You will have to make the correct size cutout in your handlebars. Gotta keep it well lubed also.

Dont know about that one but when I cant find a laid out parts manual I just go here and print one out. Even includes all the parts numbers. http://www.crotchrocket.com/fiche_section_detail.asp?category=Motorcycles&make=Honda&year=1972&fveh=2927

Is this what your looking for???? ftp://manuals.homeftp.net/Manuals/Honda/Honda_CB450K-500T_twin/Shop_Manual

Not sure if these help all that much. The rear of the fairing and the tank use the same mount. All it is is a flat plate that connects to the frame with u-bolts. I could get a pic of that also.

A little progress. Just fitting things up before prepping for paint.

The 1972-73 SL350K2 had a 21" front. I would think it could go on a 450 with very few mods. There is one on eBay right now..... http://search.ebay.com/230207615913