Search results

I bet if he had to ride a motorcycle, this would be it... http://www.hellohelmet.com/2012/11/best-custom-superbike-iron-man-helmet.html

Perfect build, i just want it http://ilducatista.wordpress.com/2012/09/06/wrench-monkees-ducati-750-ss/

Hey guys, I took the Gopro out on a few rides and now i wanna make the videos smaller in size but not quality, i have a few 3:00 clips but when i use the GoPro software the clip comes out to 2GB @ 720p...and the RAW video is only 330mb...WTF and i even trimmed some off the original clip...

not worth the price, but i think its badass to add to my desk http://www.ebay.com/itm/Radial-Engine-WWII-RAW-Airplane-Piston-Iphone-5-Ipod-Lightning-USB-Charging-Dock-/400327616134?pt=PDA_Accessories&hash=item5d3562a686

hey guys, im looking for these clip ons, i have seen them on Ebay at one time but now i can't find them, im only finding them on non-trusted sites, i know they are from asia for sure but i really want to try them out and they have adjustable angles on them im looking for 35mm ones Thanks

hey guys, I have a cb350 gauge, but it has more miles than what is on the stock gauge, basically switching gauges because then other gauge i have doesn't have a trip odo. Is there a way to set the miles on these? or am i gonna have to add miles forever till 99,999 and then start adding miles...

hey guys so my headlight bracket on my BMW is busted and going to just buy some ears but aren't they a little $$$? i have 35mm forks and looking at about 3.5 inches out from the forks any ideas for like $30-40? i can't find a stock one to replace on my bike. also do you know of any way to...

Ok so i have a 1980 BMW R65 So far have done the following.... Tank De-rusted and Sealed professionally New fuel lines and filter cleaned, and rebuilt carbs New Spark plugs New Battery Changed the oil and filter Bike has Bing 32 carbs So i get the floats full of fuel and the bike starts right...

LMAO! check out that setup http://www.ksl.com/index.php?nid=218&ad=19574487&cat=144&lpid=3&search=

Looking for CB360 front disc setup, msg me what you have. also need the front forks and triple tree going to need the front wheel as well, unless you just have the hub going on a CL350 thanks

Does anyone have any recommendations for gauge overlays for my cl350? i have seen them for the CB350, but not the CL, i wonder if its worth it that i buy a CB350 speedo and just use my tach from my CL? i got them both cracked open and ready to be restored to beautiful. CB350 speedo = trip and...

So im finishing up the frame today.... its been too cold and before i send off the frame to get sand blasted and powder coated i want to setup for a rear mount battery. Any ideas on this? is it just always custom? I don't have a welder so i would have to take it to a shop. Is there any pre-made...

hey i bought the crappy snap ring remover with adustable heads from harbor freight and they don't open wide enough to remove the snap ring off my wheels do you have any other places and what size opening i need to look?

http://www.scribd.com/doc/15050635/Honda-CB-CL-SL350-Carb-Data-and-General-Info wow i just found this... why doesn't my honda shop manual contain this lovely information?!?! Enjoy!

So i bought this bike from John on here, and took it home and got started on getting a title... time passed and i got anxious so i started tearing it down because even if i couldn't get it registered i could part it out... After getting the bike stripped, not long after i got the title in the...

hey guys, I tore apart only one of my carbs today, ill leave the other as a reference of where everything goes, its all going to soak in carb cleaner for about 2 days... i opened them up and it was that night gummy golden/yellow gel/film all inside the float bowl. One of the butterfly's was...

I whole heartedly stand by kroil http://www.kanolabs.com/penLub.html they will even send you a sample but i bought PB blaster first thing when dismantling my bike, and this beats it hands down and does a better job than PB blaster, PB blaster worked great till i got something stuck and i mean...

looking to upgrade my cl350 with a whole front setup with disc brakes, if you are interested you can have my front setup +drum if you want

so its down to bare bones and trying to remove the engine... any tips? ive gone over my manual like 10 times.... I know that it comes out the right side, so do i tip it forward and try to remove the back first or do i just tilt the top? i even took out the starter thinking i would have more room...

where is a good place to get the stainless steel bolt kits also where can i find more stainless steel bolts that don't go on the engine, such as the shock mount bolts, battery mount bolts, chain cover bolts, carb mount bolts, exhaust bolts, kick stand bolts just want it rust free and new vs...