Search results

  1. D

    cl360 fork spring stiffening

    Hi Guys, Has anyone inserted pvc spacers in their cl/cb 360 forks to stiffen the springs? If so, what size diameter and length did you use please. Thanks in advance! -D
  2. D

    75 cl360 backfires right cylinder

    Hi, Tried everything but right cylinder is backfiring and the more gas you give it the more it breaks up. Everything is cleaned and adjusted, timing, carbs, valves? Pilot screw adjustment does nothing to help. Greatly appreciate your help guys! -dshricci3
  3. D

    Ideas Please cl360 bogs when throttled

    Hi Guys, Any Ideas Please cl360 bogs when throttled? Everything elec/gas/valves is adjusted/cleaned, I just don't have an idea. Thanks -D
  4. D

    Anyone have any luck using used Mikuni Carbs on a cl360

    Hi Guys, Anyone have any luck using used Mikuni Carbs on a cl360? I see them on Craigslist for Kawasaki and other bikes. I was wondering if using any 28-32mm carbs might work. I appreciate your help in advance. -D
  5. D

    Jetting for CL360 with pods and Dime City Short Mufflers

    Hi Guys, Could one of you help a brother out and let me know which jets to buy for a '75 CL360 with Keihin carbs if I run pods and 16" shorty mufflers. I would so greatly appreciate it! Many Thanks in Advance -dshricci3
  6. D

    450 heads on 360

    Hi All! Has anyone put 450 heads on a 360 to increase performance? -D
  7. D

    cl360 Blinker removal/upgrade to LED Help Please

    Ok... so I NEED your help electronic Gurus! My '75 cl360 has dual filament blinkers/running lights. The front sets have two wires each that connect to one connector each, that is it's like the left light has one wire and the right has one wire because both of these lights two wires go to a...
  8. D

    cl360 led blinkers need 3 or two prong electronic flasher

    Hi Guys, Upgrading my blinkers to leds with resistors built in. My stock flasher has two prongs do I need a three prong one? And some suggestions have been DOT 522 Flasher or Tridon EP35 three prong. Has anyone used these? THANKS in advance! -Dshricci
  9. D

    speedometer question

    Hi, I'm trying to order a drag spec speedometer for my '75 cl360 and my local bike shop (had a gift certificate) he wants to know the ratio (2:1 or 2240@60?) and cable size, specifically if it's a 12mm cable? Man I've tried emailing drag specialties, measuring the cable which seems like...
  10. D

    Short Tach cable for cl360

    Hi Guys, Could one of you please suggest where to buy a shorter Tach cable that will fit my '75 cl360. I want to use a smaller tach and move it closer to the engine. I would really appreciate your suggestions. Thanks -dshricci
  11. D

    What year and model Gas Tank is on this 360?

    Hi, I need your help. I don't believe this is a 360 gas tank pictured here, it seems smaller. I've searched but cannot figure out what year and model this tank is. I appreciate your suggestions! -David
  12. D

    does my 75 cl360 run 12 volt fuses?

    Dear All, Does my 75 cl360 run 12 volt fuses? Where do I get them? Thanks in advance! -David
  13. D

    1975 cl360 no headlight, horn or running lights

    Dear All, this is my first post and I am hoping that you can help me. I just bought a 1975 cl360 and am trying to get her running. While the carbs soak I noticed that when I turn the bike on, the blinkers work but no headlight, no horn, no running lights except for the tail light? I just went...
  14. D

    1975 cl360 electrical question

    Dear All, this is my first post and I am hoping that you can help me. I just bought a 1975 cl360 and am trying to get her running. While the carbs soak I noticed that when I turn the bike on, the blinkers work but no headlight, no horn, no running lights except for the tail light? I just went...
Back
Top Bottom