Search results

Hi Ned, The bike is looking good! I'm in Freo, saw another Ace on south street earlier this week? Liam

3. Night light = Orange (+ve) and Blue (-ve) ? ... I'm confused - which wires to I splice them to on the stock harness? (sorry for the questions, need to double check before I go cutting wires. Gonna try to do this tonight ... Cheers, Haz Hi Haz, I can only help with the night light...

Valve adjustment this morning. Skyteam cover off, Rocker cover off, Screw cap thing removed and T lined up, Valves adjusted to 0.05mm turned over and checked again perfect tried to get a 0.07mm gauge in the gap didn't go so happy the gap is actually 0.05. While the skyteam cover was...

I think she has started to loosen up, hit 100 on the way to work with the standard gearing. I will be doing the valves and an oil change this weekend try and keep things tip top.

Aint it Fun, I am just going to start picking up Honda spares for mine as i know the original parts are going to fail. $2500 dosent stretch very far when building a motorbike at least the money went into the engine and frame, i have really enjoyed making mine better than new.

Not going to fit a Tacho, just want a nice simply front end.

Hi Haz, i use WD40 with the straw, shove it under the grip and give it a squirt then work the grip off and use hairspray to slide them back on then it sets into place.

Looking good mate, I must say there are some cool looking toys in that shed loving the red magura hydraulic brakes!

Moved the ignition switch and finished the bracket off. All done.

The throttle cable needs a bit of attention to get it to work freely, you might need to take the tank off and make sure the throttle cable isn't being held or moved around by any wires or brackets. Mine was a pain to get sorted aswell.

Nice, I might as well ask before everyone else, where did you get the fairing from?

Re: 回覆: Re: 回覆: The SkyTeam 'Ace' Resource I removed the bracket, can't remember how it was run but you need to keep it free and able to move when you turn the bars so not to pull the cable.

Re: 回覆: The SkyTeam 'Ace' Resource I had this problem also, so I took the tank off and removed the wires that are held in the clips with the throttle cable, so you just have the throttle cable sitting in the two clips and re-route it at the front so it's on top of the wiring so it can move...

Re: 回覆: The SkyTeam 'Ace' Resource I have mounted mine the same. Seems to be ok so far.

Here is how the instruments were this morning. Here is the new bracket test fitted before I solder the LED's in The drivers eye view

Getting into the new speedo mount and moving the ignition. Original After a little while in the shed the new one.

A little bit of a tidy up, swapped for some shorter stainless bolts. Before After Working on a new speedo bracket and lights this afternoon.

perhaps its just me after using the weird VFR clutch, i think i will have a play with the adjustment.

Just ordered a set of these EBC Brake Pads FA165TT. hope they will work a little better than the stock ones. went with the carbon ones instead of the copper sintered ones as i thought they may be a little hard. What kind of pads are everyone using...

Thought i would start a new thread to cover all things clutch. my clutch has no real feel to it, not sure if this will improve with a few more K's on the clock or not? did a little research and the ACE clutch looks very similar to the CG 125(well the same)...