cbcafejunkie
Been Around the Block
Here are the pics:
This is the battery box I made from 22g sheet metal using my vice as a brake. I also reused the starter bracket and welded it to the box. The bare metal place is to act as heat sink for my regulator.
Between my last post and this I must have wired my regulator wrong or damaged it, so I switched back to stock after distorting a battery no more problems.
Here's a cool vintage looking photo of it now
I'm still working these things
*Neutral light comes on only when start button is pressed
*Need correct winker relay for led lights. Anyone know?
* Need to tune carbs was able to start up Thanksgiving but was running rich
My setup as of now ( k&n factory airbox, stock carbs, and mac 4-1 header no exhaust (don't think I'll get a muffler soon unless someone has one that will fit 2 1/2" OD of mac pipes.
This is the battery box I made from 22g sheet metal using my vice as a brake. I also reused the starter bracket and welded it to the box. The bare metal place is to act as heat sink for my regulator.
Between my last post and this I must have wired my regulator wrong or damaged it, so I switched back to stock after distorting a battery no more problems.
Here's a cool vintage looking photo of it now
I'm still working these things
*Neutral light comes on only when start button is pressed
*Need correct winker relay for led lights. Anyone know?
* Need to tune carbs was able to start up Thanksgiving but was running rich
My setup as of now ( k&n factory airbox, stock carbs, and mac 4-1 header no exhaust (don't think I'll get a muffler soon unless someone has one that will fit 2 1/2" OD of mac pipes.