Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
We noticed you are blocking ads. DO THE TON only works with community supporters. Most are active members of the site with small businesses. Please consider disabling your ad blocking tool and checking out the businesses that help keep our site up and free.
May have a...situation. Installed the exhaust (properly, with gaskets) - while this has most certainly taken care of the rattle coming from the headers, that absence of noise means I can now hear a bit of a clatter coming from...somewhere else. I've adjusted the cam chain tensioners without any noticeable difference, so now I'm thinking it's more significant. It kinda sounds like it's coming from the bottom end, and I'm wondering if it's the primary shaft.
Furthermore, the base gasket is leaking. So that can't be good. I don't know if torquing down the head bolts is in order - they're already pretty tight at over 30 ft lbs if I remember correctly. I'm kinda ok with the situation, not too bummed out. I mean, shit - it's hardly great news. But if I have to pull the damn thing out and do it over then that's what I gotta do. Shit.
Have you run it enough to know for sure? The head takes a bit of a run at RPM's to show a leak sometimes where the base will leak easier. I wonder if one of your locating dowels is a little proud?
some clatter is normal, some is bad. I don't know the normal for a CB750 but my CM450 when valves we set right had a real clatter at idle and some other parts of the rev band and you could hear it way more depending on where the bike was running at. In the open driveway it was minor, in a garage or ally etc it was damn loud and sounded like it was going to implode but it never did. Case clatter on that was if the counter balancer was getting lose and it was an easy solve.
I have my man Gabriel coming over today - initially the plan was just to vacuum synch the carbs, but I fear my job ahead may be slightly more substantial. I've decided to be totally ok with whatever situation arises. I'm deciding that now. Ask me again in a few hours...
Im not familiar with these CBs, i think they use a primary chain. If so, the clatter from the bottom end you are hearing is probably that. Syncing the carbs will make it run smoother and by making the power pulses more even it will reduce primary chain clatter. This is a common issue on KZ650/750 that use a primary chain.
I replaced both the primary chain and the rubber dampers inside the primary shaft when I rebuilt the engine. Maybe the clatter will go away/subside/be normal after a carb synch and valve clearance check. Not sure about the base gasket leak though - 99.9% sure there was no crap in the locating dowel holes but that leaves 0.01% of absolute possibility.
the sound doesnt have to do anything with the status of the chain, uneven power pulses will cause the chain to rattle as there always must be some tolerance between the gears and the rollers. if you are way out of sync it can be pretty bad.
My GL1800 has rattles at idle. Always has, they all do. The exhaust is so quiet you hear everything else, and when Honda went to chain driven cams the old silent GL1500 (belt-driven cams) owners thought something was wrong. The DOHC CBs have twice the chance for valve train noise as the SOHC models.
I know the cylinder studs in the F models can be torqued down more than the manual states, 33 ft lbs I think. Mine are pretty much torqued down to that, maybe a little less. That will be the first thing to try - check the torque and see if I can tighten them down some. As for the clatter - I'm cautiously hopeful that a carb synch and valve clearance check may help.
Base gasket leak and disconcerting rattle from the engine amounted to one thing - pull the bastard and have at it. My friend - Honda mechanic of 42 years - didn't hesitate when we fired it up and he heard the noise, and we got the engine pulled in 30 mins. Helluva guy to have pop round to the garage every now and then. So, in I go. Again.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.