I put my chain on, hooked up the clutch and sprocket cover last night. I also bled the brakes. It moved about 4 feet under its own power. Whoo hoo. I am working on the rear brakes tonight. I am concerned however with two small bubbles that have formed on my tank. I think it is weeping fuel. I used a slide hammer to pop out some dents and I must not have sealed up the welds good enough. I need to figure out a way to seal it up or I will be stripping down the tank to repair it. I really dont want to do that. Any suggestions. I also hid all my wiring and mounted my seat with a nice rubber seal.