wargo522
Active Member
heres the seat after i trimmed it up and did a quick mock up. still some trimming to go then i'll lay down some bondo. but as for mounting, i haven't figured out a way yet. i'm thinking about making mold of the original seat pan. so my inside of my tail doesn't get dirty and to protect the wiring. bolting the rubber mounts on it so the fiberglass doesnt crack from the vibration of the motor or just say fuck it and mount it straight to the frame. but those turn signals aren't staying there.
here are the few spots i need to bondo. i'll post pics of the bondoed phase tomorrow.
i swapped out the swing arm, old drum brake and put on disc brake. also new kz1000 shocks
i also may not end up using that light i have another light i could use
here are the few spots i need to bondo. i'll post pics of the bondoed phase tomorrow.
i swapped out the swing arm, old drum brake and put on disc brake. also new kz1000 shocks
i also may not end up using that light i have another light i could use