Korsch_RS
Active Member
Re: Black and Gold Cafe - 71 CB350 - Exhaust work
Thanks all!
I'm not really a fan of lots of chrome, so I'll be keeping it to functional chrome only (like on the forks). Final product (ever changing in my head) will probably have shiny stainless spokes, but the rest will be mostly brushed or satin finishes. These pipes will start life painted black, and will possibly get either ceramic coated or wrapped in the future.
There's enough flexibility to get then on and off when they were tacked (not 100% sure about fully welded). If I have problems installing the plan is a single slip-fit joint with spring retention in this section:
So after I got it all tacked together I promptly cut it apart to do the full welding. The right primary was cut off at the collector inlet tacks. I finished up the welding and smoothing on both primaries last night, I'll rejoin them and finish the aft section tonight, paint and final install should be tomorrow!
Also, got new tires!! Old ones were weather cracked
More soon!
Thanks all!
I'm not really a fan of lots of chrome, so I'll be keeping it to functional chrome only (like on the forks). Final product (ever changing in my head) will probably have shiny stainless spokes, but the rest will be mostly brushed or satin finishes. These pipes will start life painted black, and will possibly get either ceramic coated or wrapped in the future.
There's enough flexibility to get then on and off when they were tacked (not 100% sure about fully welded). If I have problems installing the plan is a single slip-fit joint with spring retention in this section:
So after I got it all tacked together I promptly cut it apart to do the full welding. The right primary was cut off at the collector inlet tacks. I finished up the welding and smoothing on both primaries last night, I'll rejoin them and finish the aft section tonight, paint and final install should be tomorrow!
Also, got new tires!! Old ones were weather cracked
More soon!