Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
We noticed you are blocking ads. DO THE TON only works with community supporters. Most are active members of the site with small businesses. Please consider disabling your ad blocking tool and checking out the businesses that help keep our site up and free.
No but i probably will.
I have to swap out the rear wheel and tire, get new bars and a battery and she'll be rideable. I am moving it to my moms 4 car garage (where i keep my other bikes) to finish it up. I have to swap out the rear tire before i can move it.
Won these headers on eBay!
Got both the left and right. The ones i have are really bad on the one side cracked through. I'm bidding on replacement exhaust as well
Sent from my DROID RAZR HD using Tapatalk 2
Got the rear wheel on. I thought i had a tire that would fit but it turns out that the tire I bought was a 130/90 18 too big :-( but the tire that can on the lester isn't that bad.
Rear wheels on the Airheads are a PITA no doubt. Very tight fit with the fender and pipes etc. etc. Helps to deflate the tire and raise the rear end by putting the center stand on a block of wood.
I am replacing the rear shock anyway so i pulled it and the wheel went on. A guy on advridr sold me a set of exhausts and rear shocks, both in gold condition for $100 shipped.
Put the "newish" handlebars on today with new grips. The throttle cables were a little sticky, but after a little lubricant they're working like a champ! I also got the "newish" headers in today and found out that I will need a special exhaust nut wrench, which I just bought...
Put the "newish" handlebars on today with new grips. The throttle cables were a little sticky, but after a little lubricant they're working like a champ! I also got the "newish" headers in today and found out that I will need a special exhaust nut wrench, which I just bought...
Got the exhaust wrench today! Dam that was fast shipping!
The wrench worked out great. I had to give it a couple rubber mallet love taps.
Pulled the old rusting headers off and put the new ones on. I have to get a cross pipe for the exhaust.
Sent from my DROID RAZR HD using Tapatalk 2
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.