BillyGoat4130
Been Around the Block
So I got the radiator about 75% mounted this afternoon. Weekend was shot to shit with work, so didn't get the hours I wanted on this project. Not really happy with how this is turning out so far. Going to finish it in the manner which I had planned and then re-evaluate.
Basically I just have a piece of 1/2in cold roll that was tapped on the end and then welded to the frame for the radiator tabs to bolt to. I need to complete one for the bottom. The radiator will be inefficient in this configuration (leaning so much) but I am in a balancing act between room for the exhaust, keeping the radiator away from the heat of the exhaust, and keeping front wheel/tire clearance. My turning radius looks like it'll still be fairly decent.
Basically I just have a piece of 1/2in cold roll that was tapped on the end and then welded to the frame for the radiator tabs to bolt to. I need to complete one for the bottom. The radiator will be inefficient in this configuration (leaning so much) but I am in a balancing act between room for the exhaust, keeping the radiator away from the heat of the exhaust, and keeping front wheel/tire clearance. My turning radius looks like it'll still be fairly decent.