Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
We noticed you are blocking ads. DO THE TON only works with community supporters. Most are active members of the site with small businesses. Please consider disabling your ad blocking tool and checking out the businesses that help keep our site up and free.
I used a splice lug (ferrule) from Lowes in the electrical department where you find wire nuts and connectors then trimmed my wires back slid on two shrink wrap one smaller than the other for double insulation then on with the ferrule then solder it... let it cool then shrink wrap it twice
3 qts Shell Rotella 10/40 don't over fill the tank put 3 qts in and run it for a while then add if you need it. if complete tear down rebuild I squirt oil on the tops of each rocker good before start up.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.