Sderbyshire
Into Sailing, classic Triumph cars and motorbikes.
Following the axle spacer and stuck float valve incidents the little Honda 360 Cafe is running great.
However I'm experiencing a slight 'twitch' when turning into a slow corner/junction.
Bike is fine at speeds over about 40mpy but at 15-20 mph there is an instant of instability upon initial turn in.
It feels like something is loose, but it's not.
Front end of the bike is rebuilt with new bearings, rebuilt standard forks which are lowered about half an inch.
Twitchiness present turning left or right.
Any suggestions as to the cause, could the slight lowering be the cause?
I've not removed/rebuilt the swing arm or the rear shocks, could this cause the issue if pivot bearings shot?
Regards
Steve
However I'm experiencing a slight 'twitch' when turning into a slow corner/junction.
Bike is fine at speeds over about 40mpy but at 15-20 mph there is an instant of instability upon initial turn in.
It feels like something is loose, but it's not.
Front end of the bike is rebuilt with new bearings, rebuilt standard forks which are lowered about half an inch.
Twitchiness present turning left or right.
Any suggestions as to the cause, could the slight lowering be the cause?
I've not removed/rebuilt the swing arm or the rear shocks, could this cause the issue if pivot bearings shot?
Regards
Steve