Finally the mercury dipped below 40 degrees so a healthy day in the shed was to be had.
During the week a received some of my parts.
Jets: I'm going on the rich side for the 466 kit, K&N filters and open but appropriately long pipes. Bought some smaller mains so I've got options (100, 92, 80) and also have some slow options (42, 35 ideally I would have 38 too):
My relays came in for the indicators, headlight and I'm waiting on another 5 pin for the coils, plus my new starter solenoid (old one looked crappy):
I picked up my steel for the swingarm. Completely farked it up originally by ordering tube and not realising that I should have been more specific and ordered round. So I've got 1" x 2mm & 22.2mm x 1.6mm tube in both square and round now. Oh well I've got stock here now should I want to make a table or anything
. Also picked up some 25mm x 3mm Alu bar which will be used to make exhaust hanger brackets:
Finished the battery box/electrics tray. Only bits left are putting the final relay on and buying the combined rec/reg which is going on the empty side. It's tight but it all fits thankfully: