neevo
Over 1,000 Posts
PJ: excellent info. Didn't realise the SSB's might have circuitry in them, probably explains why their dimensions are the largest. Looks like a great option then, as I already have a charger and they are a known quantity to me too given I've been running one for years without issue.
Also thanks for the input re angle for bike lean. Will check current setup and see what angle I have and keep fingers crossed it's larger than 50 degrees.
doc_rot: you're correct. Probably using a sledgehammer to cut a cake, however the reason was I didn't want weld seams on the exhausts other than the hardware where it slips together. Probably a bit overkill but I wanted the clean tubes.
Will be heading out to hardware store today for some PVC tube, sand and heat gun. Hope to have more updates tonight.
Also thanks for the input re angle for bike lean. Will check current setup and see what angle I have and keep fingers crossed it's larger than 50 degrees.
doc_rot: you're correct. Probably using a sledgehammer to cut a cake, however the reason was I didn't want weld seams on the exhausts other than the hardware where it slips together. Probably a bit overkill but I wanted the clean tubes.
Will be heading out to hardware store today for some PVC tube, sand and heat gun. Hope to have more updates tonight.