JustinLonghorn
No Purple Hearts, No Blue Ribbons
Re: A Drewski/Seaglider Production
Rad!!
Rad!!
"Drewski's h1a/750"
- Thread starter Drewski
- Start date
stroker crazy
crazy as a fox
Re: A Drewski/Seaglider Production
Great score!
If you keep those wild chambers at least you won't need a side stand.
Crazy
Great score!
If you keep those wild chambers at least you won't need a side stand.
Crazy
Re: Drewski's h1a/750
Wow, 10 pages back... I guess I should blow the dust off this Project...
Well kids, if you've been following along, you'll know that the "new" Drewski/Seaglider Project is actually the Kawasaki h2 FBG Tracy Project!! That's where the FBG drag motor is going now. It's gonna be a BEAST to say the least.
;D
"So what about the h1/750" you say? Good question. I have an answer.
This is now just a "Drewski" Project... Seaglider is gonna have his hands full and his pocket emptied with the FBG/Tracy Project. ;D
Just foolin around the other day and came up with this as a starting point:
The front end and rear end are gonna stay. The engine is just empty cases. Looks o'k though! It's a h2 750 and I like the concept so much, that I'm gonna yank the engine outta the "Mongrel" and stuff it in the h1 frame. The chambers will need a little tweaking to fit, but we'll make it work.
Anybody wanna buy the "Mongrel" rolling chassis? ;D ;D
Wow, 10 pages back... I guess I should blow the dust off this Project...
Well kids, if you've been following along, you'll know that the "new" Drewski/Seaglider Project is actually the Kawasaki h2 FBG Tracy Project!! That's where the FBG drag motor is going now. It's gonna be a BEAST to say the least.
;D"So what about the h1/750" you say? Good question. I have an answer.
This is now just a "Drewski" Project... Seaglider is gonna have his hands full and his pocket emptied with the FBG/Tracy Project.
;DJust foolin around the other day and came up with this as a starting point:
The front end and rear end are gonna stay. The engine is just empty cases. Looks o'k though! It's a h2 750 and I like the concept so much, that I'm gonna yank the engine outta the "Mongrel" and stuff it in the h1 frame. The chambers will need a little tweaking to fit, but we'll make it work.
Anybody wanna buy the "Mongrel" rolling chassis?
;D ;D
JustinLonghorn
No Purple Hearts, No Blue Ribbons
Re: Formerly: "A Drewski/Seaglider Production" Now, "Drewski's h1a/750"
Would you take $50 for the roller? Ha. But seriously. Would you?
Would you take $50 for the roller? Ha. But seriously. Would you?
JustinLonghorn
No Purple Hearts, No Blue Ribbons
Re: Formerly: "A Drewski/Seaglider Production" Now, "Drewski's h1a/750"
Ha, I would pay it, but I wouldn't sell it for $50.
Ha, I would pay it, but I wouldn't sell it for $50.
Hoosier Daddy
Earache my eye...
Re: Formerly: "A Drewski/Seaglider Production" Now, "Drewski's h1a/750"
Call me a voyer.... I just wanna watch
Call me a voyer.... I just wanna watch
Re: Formerly: "A Drewski/Seaglider Production" Now, "Drewski's h1a/750"
Haha! Don't blink!! Things can change in an instant around here! Come get that dragbike chassis so we have some room to work around here!
Gee, I don't know...
I'd love to, but there are a lot of things to get done. I might just shelve this one for a year, working a little at a time. The title needs to be sorted out first. That can take some time and will require me to jump through a few hoops. We'll see how it goes.
Seaglider REALLY wants his FBG/Tracy "beast" finished, so that will get priority. I owe him that. ;D
Meanwhile, I still have the KZ to ride, so it's not all doom and gloom. ;D 8)
Hoosier Daddy said:Call me a voyer.... I just wanna watch
Haha! Don't blink!! Things can change in an instant around here!
Come get that dragbike chassis so we have some room to work around here! DreadRock said:
Gee, I don't know...
I'd love to, but there are a lot of things to get done. I might just shelve this one for a year, working a little at a time. The title needs to be sorted out first. That can take some time and will require me to jump through a few hoops. We'll see how it goes.
Seaglider REALLY wants his FBG/Tracy "beast" finished, so that will get priority. I owe him that.
;DMeanwhile, I still have the KZ to ride, so it's not all doom and gloom. ;D 8)
Re: "Drewski's h1a/750"
Far too many things on-the-go these days, but we should be able to get some assembly done in the weeks around Christmas.
I think the h2 engine should be in the frame, along with most of the electrics, cables, fuel/oil lines, etc. The WTF chambers will need some mods to fit properly, so that might take a little longer.
Just as a refresher, this is sorta the look I'm after:
I'm still searching for a rear fender, tail light, grab rail and seat. I believe all years from '69 through '72 will fit and look very close to what I need. The '72 fender is painted and not chrome like the early years, but I could live with that. As well, the later years have a larger tail light. I'd prefer the smaller, older tail light assembly and chrome fender, but "beggars can't be choosers" I'm told!
I'll get some pics up as soon as we get the pieces assembled.
Far too many things on-the-go these days, but we should be able to get some assembly done in the weeks around Christmas.
I think the h2 engine should be in the frame, along with most of the electrics, cables, fuel/oil lines, etc. The WTF chambers will need some mods to fit properly, so that might take a little longer.
Just as a refresher, this is sorta the look I'm after:
I'm still searching for a rear fender, tail light, grab rail and seat. I believe all years from '69 through '72 will fit and look very close to what I need. The '72 fender is painted and not chrome like the early years, but I could live with that. As well, the later years have a larger tail light. I'd prefer the smaller, older tail light assembly and chrome fender, but "beggars can't be choosers" I'm told!
I'll get some pics up as soon as we get the pieces assembled.
Re: "Drewski's h1a/750"
Walms, the tank and side covers will remain as they are in the pics on the previous page. Just the right amount of "patina" and solid original good looks.
I'm not sure I know how to take that Brother...
Walms said:Kewl beans Drewski! What do you have planned for paint and decals?
I'm partial to the stripes only from the H1A, I've never seen that done before...
Walms, the tank and side covers will remain as they are in the pics on the previous page. Just the right amount of "patina" and solid original good looks.
Seaglider said:
I'm not sure I know how to take that Brother...
Seaglider
Active Member
Re: "Drewski's h1a/750"
Oh you know....willing to experiment and try new things....you ride around on the "Mongrel"....I think you know what I'm talking about. ;D We're putting a FBG motor with a Tracy body....I'd say willing to try unusual things is definitely what we do....yes me too! 8)
As Maxwell Smart used to say "and loving it!!"
Oh you know....willing to experiment and try new things....you ride around on the "Mongrel"....I think you know what I'm talking about. ;D We're putting a FBG motor with a Tracy body....I'd say willing to try unusual things is definitely what we do....yes me too! 8)
As Maxwell Smart used to say "and loving it!!"
