Big Rich said:Good point Joe......update your thread! Haha....
Big Rich said:Thanks Ben! The splitter won't be used by me though. When I bought the triple tree on eBay, it just happened to include the splitter, top clamp, etc. All I need is the stem itself and the upper nut for the stem.
Good deal on those lines though! I've gotten some from this guy on eBay before:
http://www.ebay.com/itm/121382183259?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
Big Rich said:Here are the lower frame mounts:
I bent the tubing with a propane torch (both tubes at the same time so they are symmetrical). And the "cross tube" in between the frame mounts is just a tube with 6mm nuts welded in. With that tube, any pressure from wind pressing on the fairing will be pressing on the tube - not the frame tabs I welded on.