Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
We noticed you are blocking ads. DO THE TON only works with community supporters. Most are active members of the site with small businesses. Please consider disabling your ad blocking tool and checking out the businesses that help keep our site up and free.
I've been searching around to find some help on the actual process of making my 71 CL350 kick-start only. This is my first bike and I chose a 350 specifically to learn how to wrench for myself. I know very little at this point but I have the manual and I am a quick learner, but I seriously lack any knowledge of electrical systems. Are there any threads that outline the process of removing the electrical start components?
I also ordered a new rectifier from Oregon Motorcycles, so what else to I need or need to do to address the issue of battery drain?
I started by draining the oil and removing the starter, starter chain, started clutch and a couple gears. When it came time for the internals, I had the help of a friend. Finally, plug the hole and fill her back up with fresh oil.
Seek and you shall find on the Ton. Use the search function, it's my favorite tool of all.
as far as electrical stuff, its easy. just pull the starter, disconnect any wires that go to it. look at the clymers electrics manual and disconnect anything else it doesnt require.
Are you removing the starter for simplicity / lightness or or you removing it in an attept to cure a poorly charging system? If it's the latter, you will be better off fixing the charging system as the starter should not cause your battery to drain (except at start time, of course).
Are you removing the starter for simplicity / lightness or or you removing it in an attept to cure a poorly charging system? If it's the latter, you will be better off fixing the charging system as the starter should not cause your battery to drain (except at start time, of course).
Ya man. Its an insanely simple process. Its all been layed out for ya here already. As far as a plug, you can spend for the machined billlet or brass plugs out there, or hit up your local auto parts store and grab an engine expansion plug for around $3. Cant remember the exact size you'll need, but if your working on a bike you should have a micrometer... Good luck man.
Otherwise known as a "Freeze Plug" for the laymans term... The zit faced punk behind the counter at the Autoparts store may give you that all too common blank stare if you say "engine expansion plug".
Thanks guys - really appreciate the help. I've found in other forums everyone expects you to be an expert and talk down to anyone asking "simple" questions. How the hell are you supposed to learn - no one else in family or friends for that matter are mechanically inclined so i'm learning on my own. I understand and utilize the search function on the site and I always do so prior to posting - I simply found the threads I read through to be rather vague - especially for someone without a lot of experience. Thanks a lot for taking the time to help me out!
Thanks guys - really appreciate the help. I've found in other forums everyone expects you to be an expert and talk down to anyone asking "simple" questions. How the hell are you supposed to learn - no one else in family or friends for that matter are mechanically inclined so i'm learning on my own. I understand and utilize the search function on the site and I always do so prior to posting - I simply found the threads I read through to be rather vague - especially for someone without a lot of experience. Thanks a lot for taking the time to help me out!
Thanks guys - really appreciate the help. I've found in other forums everyone expects you to be an expert and talk down to anyone asking "simple" questions. How the hell are you supposed to learn - no one else in family or friends for that matter are mechanically inclined so i'm learning on my own. I understand and utilize the search function on the site and I always do so prior to posting - I simply found the threads I read through to be rather vague - especially for someone without a lot of experience. Thanks a lot for taking the time to help me out!
Oh man, I hear ya there. I'm the only mechanicaly inclined person in my family as well, and I dont know a single biker. EVERYTHING I know has been from this board and my owner's manual. I really owe alot to the guys at DTT.
Never be afraid to ask questions....
It does help if you make a build thread though, that way everyone can see the help they give you go to good use. Makes everyone that helps a part of the project. Ya dig?
Not a problem man. Mine's about ready to fire up and hit the road. Feel free to ask me anything you want. My mistakes can be learned for both of us. ;D
Not a problem man. Mine's about ready to fire up and hit the road. Feel free to ask me anything you want. My mistakes can be learned for both of us. ;D
Those things are great. Sears is great. I bought one a few months back, took it home, opened it up and it was used & broken! I returned it and they swapped, no questions asked. Sears is fantastic. I go Craftsman whenever I can.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.