Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
We noticed you are blocking ads. DO THE TON only works with community supporters. Most are active members of the site with small businesses. Please consider disabling your ad blocking tool and checking out the businesses that help keep our site up and free.
It's a Korean copy of something, branded as a golden boy but I think only fitted as OEM.
Would be great to find something to match it, I'll upload a picture of the tread pattern after I've had my supper.
Steff ......................going back to the day, I used to get cast offs from Tom Kirby. Plenty of life left in them for road use and they even performed well in the wet. That was in the days before I STOPPED riding in the rain !
That would be my first port of call - '60s era period racers.
Now then - a real raking over of the old grey matter .................. I THINK the Ariel Golden Arrow used a 16" rear wheel [ may have been17" ? ], and I know I remember seeing the old Avon SMs on the back. Pretty well a block tread as yours and Miffa's Avon Mk2s. [ rear ]. Mind you. this memory is at least 50 years old !
yea .................we missed out on Stafford as the new project ["Scream"] wasn't quite ready. We were let down in the finishing straight by non delivery of a couple of key components from the US.
The bike is now completed and as you may have seen elsewhere - we've started on a new project - the trurbocharged BMW R1200ST.
The Scream is undergoing "road trials" in it's finalised form just to make sure ................ It was well tested along the way, but now we have all the definitive bits on it - we're giving it a good shake down.
Look forward to seeing you again at some of next year's events.
Thanks for that number Miffa, I think I'll hold out for a part worn to start with. I'm not working at present and on a budget of bugger all so am selling stuff to buy stuff to keep it at zero cost.
If I could risk throwing money at it , it would be up and running inside a fortnight.
However, not rushing at it headlong means there are aspects I could have wasted time and money on but with advice from Beachcomber I've changed tack on.
I've reached a bit of an impasse with the rear suspension .......
To get the ride height I want using the Honda 'Uni link' / 'Pro link' (can't remember what they call it) cantilever suspension system I need a 215/220 mm shock. I've found some quad ones at this length but they are for a 'direct' mono shock system. However due to the leverage ratio on the movement, the swinging arm moves a lot compared to comparatively little shock compression...... So I assume a mono shock rated unit will be too soft. At a loss here.
My options that I see are either:
A) to find a shock that is designed for that system, regardless of length and move the top mount to suit
B) to convert it to direct mono shock and make new mounts, or
C) make a new rear subframe and go twin shocks ?
PM me [ or open thread] with definitive measurements, datum points etc ....................I'm sure we can resolve this !!!!! No - we WILL resolve this.
However ...... my 4 pennarth - TWINSHOX are the way to go on a chair of traditional intent. A chair by virtue of what you are going to subject it to requires as much lateral support and torsional stiffness as poss ..............................
Today I had an itch to ride my trials outfit, I had half a gallon of stale petrol with a two stroke mix in which my chainsaw wouldn't run so I whacked that in the tank. Haven't started it for two months .... Second kick it fired up and I spent an hour riding around the lanes and farm tracks. Little gem never fails to make me smile, but has also got me itching to progress the Tarmac project.
rule of thumb for setting angle of rear shock / spring.
As you already know - a triangle is the strongest [ 2D structure ] form of tubing layout. The same applies if you replace one of the elements with a shock [ raving generalisation ].
However the theory obtains. Sit you butt on the bike and adopt the most normal posture - get someone to take a line between your hip joints [ side to side ] - then take that datun and strike a line to the rear lower mount [ proposed ] for the shock [ Twinshox here ]. That will give you a rough vector for the line of force. This is more important for a longer swingarm element.
Just a Christmas thought amongst the Turkey and Brandy ............................
rule of thumb for setting angle of rear shock / spring.
As you already know - a triangle is the strongest [ 2D structure ] form of tubing layout. The same applies if you replace one of the elements with a shock [ raving generalisation ].
However the theory obtains. Sit you butt on the bike and adopt the most normal posture - get someone to take a line between your hip joints [ side to side ] - then take that datun and strike a line to the rear lower mount [ proposed ] for the shock [ Twinshox here ]. That will give you a rough vector for the line of force. This is more important for a longer swingarm element.
Just a Christmas thought amongst the Turkey and Brandy ............................
I'm going to make some photocopies of that loop and sketch some different ideas out.
I do intend to heavily re enforce the swinging arm pivot region with boxed in gusseting and welding a spacer within to give the swinging arm pivot greater support and bearing area. I think it will easy to locate a spindle/bolt a few inches longer.
I fried my brain trying to visualise moving the existing top shock mount up and forward to allow the use of a longer more obtainable single shock at a slant, rather than vertical. However I can't see how the fulcrum/cantilever set up will actuate it from such a mild angle, it's like it need a big drop. I like the cleanliness of the single shock unit, but unless anyone can suggest a resolution I think twin shocks will be the way forward.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.