lets see your helmets

zimm

New Member
i was thinking about this one ever heard of the brand zamp?
http://cgi.ebay.com/ebaymotors/Zamp-FJ-2-Matte-White-DOT-Helmet-Medium_W0QQitemZ110354105673QQihZ001QQcategoryZ6749QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
 

Blake

the future is my friend
Mine on left (Nolan N model), My wife's on the right (Fulmer Bobber w/ NOS bubble shield). I love my helmet but will admit that hers is way cool.
 

JRK5892

New Member



one that i have rebuilt


I also just rebuilt another one and i am matching it to the cafe paint... i will have pics of that as soon as i get it back from my buddy doing my paint


 

JRK5892

New Member
paint is done to match the cafe... figured i would pop that over here
the pearl in the paint ROCKS



I am prepping my other 3/4 now... i am going to do flat black with gold leaf flames and outline
 

arsey

New Member
just won this black metalflake buco on ebay

now I have two helmets before I even have a working bike. haha.
 

VonYinzer

Active Member



$10 on EBAY. A buddy of mine did the stripin'. Hes learning and that was an early attempt. I still think its pretty bitchin. Needs relined, and its a bit too tight. Suppose i could fix those problems at one time though, huh?
 

ridesolo

You only bear responsibility for your own actions
This is one of mine:





Sorry, crappy pix. It's getting kinna old but I keep it in a bag so UV damage making the shell brittle is kept to a minimum and I always wear a balaclava so it's still fresh inside.
 

locOleoN

Is that the best you got? OK.. now my TURN...
pretty much the same ones...Either JTRacing guards or some other vintage MX face guards.

The difference between mine and the one in the above pics is that... that guy snaps the guard directly onto the outside of the helmet.

I like to snap/connect mine onto the leather lining/ear-flap that only exists on a few makes of 3/4 helmets.
Ive found that only helmets made by: Skidoo, Bombardier, or LSI have the internal leather flaps that you can snap the guards onto..

Incidently.. I just bought this one on ebay last night:
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=320442319636&viewitem=&sspagename=STRK%3AMEWNX%3AIT
that I will put on this helmet: (notice the leather ear flaps inside the helmet...)
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=110450479295&ssPageName=STRK:MEWNX:IT


But here are a few JT Racing guards that was just listed on ebay:

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=220505823204&ssPageName=STRK:MEWAX:IT
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=220505823700&ssPageName=STRK:MEWAX:IT
 

dead bound

5'6" piece of twisted steel and sex appeal
Loco,

Thanks for posting the links to the masks. I will go ahead and get one. I had the Hanna mask on my watchlist, but let it pass.
 

locOleoN

Is that the best you got? OK.. now my TURN...
dead bound said:
Loco,

Thanks for posting the links to the masks. I will go ahead and get one. I had the Hanna mask on my watchlist, but let it pass.
just make sure that you get the right kind of helmet...
 

locOleoN

Is that the best you got? OK.. now my TURN...
lets see the inside..
I believe that you are going to have to drill holes into the shell of that helmet and rivit the snaps to the outside of the helmet.

I dont believe that has the leather ear flaps on the inside..
 

dead bound

5'6" piece of twisted steel and sex appeal
locO leoN said:
lets see the inside..
It has canvas type? ear guards/flaps (behind the ear padding) that are secured to the shell with the rivets/snaps as shown on the outside. No picture with me.

I am not sure it that material would be strong enough to hold in place.

 
Top Bottom