New Jersey sr500 tracker/scrambler

[Nj732port]

Got the wrong regulator but all the fasteners I bought fit!!

Sending back the single phase and getting a triple phase from sparck. Sorneir answered all 100 of my questions this afternoon and told me what I needed ;D

 

[Nj732port]

Should have it by next week not much else...

Slowly taking over the second room... Welding closet/work clothes, tools, beginnings to a small bike bench? Shhh this is top secret ;D

 

[Tune-A-Fish]

I have that checked Izod shirt... no welding in a carpeted room dood

Oh just a thing, but once you decide on a cuff button, yeah go ahead and remove the other one, it makes it more like a tailored shirt ???

 

[B541Niner]

Just use the apology letter she sent to you, when she figures it out.

 

[Nj732port]

I have that checked Izod shirt... no welding in a carpeted room dood

Oh just a thing, but once you decide on a cuff button, yeah go ahead and remove the other one, it makes it more like a tailored shirt ???

never thought about that button thing but mine are always the second button so the first is covered up... im not going to weld in side I need to put the welding cart together and find a place for it but were still creating storage

 

[Nj732port]

;D ;D ;D that lady just walked in as im typing this and didn't say good morning to me

Just use the apology letter she sent to you, when she figures it out.

 

[Kamn]

see, now you now she's a total biotch

 

[Tune-A-Fish]

HaaaH! she wants your wiener :

 

[B541Niner]

No Apology Tour...soon to be a World Tour.

 

[Nj732port]

any tail light/plate mounting ideas?

 

[Tune-A-Fish]

any tail light/plate mounting ideas?

Hot glue

 

[Nj732port]

Hot glue

im looking for a complete system but id probably use some hot glue for a strip if I go that route

 

[Spondon83]

any tail light/plate mounting ideas?

are you mounting the stock light or something aftermarket? Round, oval, LED strip? Look at the bottom of my page to see what I did if that helps.

http://www.dotheton.com/forum/index.php?topic=69557.15

 

[Nj732port]

are you mounting the stock light or something aftermarket? Round, oval, LED strip? Look at the bottom of my page to see what I did if that helps.

http://www.dotheton.com/forum/index.php?topic=69557.15

I looked through your thread yesterday to see what you came up with already haha I just ordered a strip of leds for it off amazon ill see how that looks I can always swap it out :-\ but I think it will be bright enough and hopefully look good

 

[Spondon83]

I looked through your thread yesterday to see what you came up with already haha I just ordered a strip of leds for it off amazon ill see how that looks I can always swap it out :-\ but I think it will be bright enough and hopefully look good

I have a strip that I was going to use, but attaching them with glue or tie straps was the only way...glue may not hold with the vibration of the SR and tie straps didn't provide the look I was after.

Take your seat Hoop, and cut a groove in the back of it so that the LED strip fits inside the hoop, then you might be able to use glue more efficiently to make it stick and so that it doesn't look glued on. You can also hide the wires.

 

[Spondon83]

here is one on a SR500..looks like he made a mount that the LED strip fits its inside of and attached it to the seat hoop from the outside.

 

[Nj732port]

That looks clean, I still need to figure out if I'm having my plate hang off the back or not. I want it to be easily accessible for tolls, I don't plan on paying any unless I have to! I think nj is the only state covered with tolls

 

[Maritime]

LOL I road through Jersey by mistake last trip to Barber, Made a wrong turn, and yes there was a lot more tolls through there than other states. The LED strip can look great if you mount it like the above, but you will need a tag light too, there are led bolts and some other small clean options for those.

 

[Nj732port]

LOL I road through Jersey by mistake last trip to Barber, Made a wrong turn, and yes there was a lot more tolls through there than other states. The LED strip can look great if you mount it like the above, but you will need a tag light too, there are led bolts and some other small clean options for those.

its terrible! they took out half to speed up traffic except they jst doubled the cost of the ones they left hahaha.

it should be arriving tomorrow so ill see what it looks like and figure out how to tuck it away nicely

 

[B541Niner]

NJ I have a LED strip that had double stick tape on it. I stuck it on top of my plate of the ZG...kind of one of those temporary things that may never change.