POST A PIC OF YOUR FIGHTER.....

rabies

time is running out....
2012-10-08_15-55-58_819.jpg
 

Moose

Motorecyclist
New front end (06 GSXR forks/calipers, 07 GSXR 750 lower triple, 05 GSXR 1000 RSD top triple, 08 GSXR 1000 rim/rotors)

IMG_20130130_212409_016.jpg
 

VegasChinois

Ride it Just Like you Just STOLE it!!
Brit & No Oil Slick!! ;D ;D ;D
Yet-That Is!!!

Still got to paint the other tank-got some black graphics for it!!
Howls like a Triple from Hell with the Southbay Underseat on it-getting WAY too many tickets :eek:

More photos when i can get the paint done-CHEERS ALL!!!
 

Attachments

  • S2300174.JPG
    S2300174.JPG
    975.6 KB · Views: 303
  • S2300177.JPG
    S2300177.JPG
    249 KB · Views: 291
  • S2300006.JPG
    S2300006.JPG
    178.9 KB · Views: 1,372
  • S2300010.JPG
    S2300010.JPG
    244.1 KB · Views: 1,471

benbenjamin

coffee roaster
hey there! really not quite sure if my bike falls under the fighter catagory, ive seen some similar bikes in this thread. but here it is. My 1980 cb750f.
 

Attachments

  • IMG_080244490810.JPG
    IMG_080244490810.JPG
    601.4 KB · Views: 511

mickheaven

New Member
So here's a photo of my ninja 250 fighter. It's a work in progress but I'm pretty happy with how it's coming along. Still have to finish up the seat cowl and upholster the seat.

What do you guys think?
 

Attachments

  • image.jpg
    image.jpg
    654 KB · Views: 316
  • image.jpg
    image.jpg
    609.5 KB · Views: 307
  • image.jpg
    image.jpg
    611.6 KB · Views: 365

mickheaven

New Member
Cheers man, still need to take off the fairing mounting tabs on the tank as well.

Yep stock headers. The new gen ninjas have a 2 into 1 headers. The reason the exhaust loos good though is my old man works for an engineering/hydraulic company. He got the guys there to make up an elbow to attach the muffler as it has a different diameter to the headers. I think the angle was like 25degrees from memory. It looks much better this way.
 

Attachments

  • image.jpg
    image.jpg
    453.1 KB · Views: 319
  • image.jpg
    image.jpg
    347.1 KB · Views: 310

ctluba

Been Around the Block
benbenjamin said:
hey there! really not quite sure if my bike falls under the fighter catagory, ive seen some similar bikes in this thread. but here it is. My 1980 cb750f.

That is a fighter!!!

Nice job on the seat / tail / side cover set up. Can you detail what you did there??
 

skyler

Active Member
Very nice fighters!
@ VegasChinois that's a hell of a paint job. The Red on Red looks a lot better than I thought it would!
 

benbenjamin

coffee roaster
ctluba said:
That is a fighter!!!

Nice job on the seat / tail / side cover set up. Can you detail what you did there??

Wow apologies for the massive delay right now.

If your still wondering,

The side covers are factory, no mods. The seat has been cut and 6 inches removed, then re attached the rear section so the factory tail can still be mounted. Trimmed off the front sections of the tail and re shaped the curve to match the side covers. . Cut the frame off from the bridge where the factory seat would rest on.

And that's basically it.

Cheers!
 

DTT Bike Of The Month Gallery

DTT Light or Dark

www.jadusmotorcycleparts.com
www.cognitomoto.com
https://www.townmoto.com
www.speedmotoco.com
www.lostapostle.ca/
www.sparckmoto.com
Top Bottom