Post a pic of your latest purchase

[yawlright]

This is my new spray gun! Ingersoll Rand 270G HVLP purchased at tractor supply 87$. It seems to be of decent quality and it comes with an air pressure regulator. It is nicer than the Husky Pro which was 100$ and with no regulator, an air regulator was 20$ extra. 87$ vs 120$ 8)

 

[dp9]

My "new" '99 R1 forks for the XV cafe project. $78 including shipping. Yep, dats right, bishes.

WHAAAAAAAAAAAT? ! ? ! ? ! ? ! ? !

h8h8h8h8h8

 

[biker_reject]

ebay score! I was prepared to pay at least 300 for R1 forks and tree. I was shocked to find this pair. The shop that sold them did a Ohlins conversion on an R1 and just wanted to unload the stockers. Straight, no scratches, gouges, or leaks. Amazing!
http://www.ebay.com/itm/300646447398?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649

 

[cobraace2]

just got this to get my xlcr project started tired of waiting for a oem tank .When one turn,s up I am to cheap to pay $600 for it

and here it is on the the frame

 

[Swagger]

......whore....... :-*

I mean that in the best way....looks like my pile of "potential" except your pile is far better organized! I'm very jealous of your Katana and my interest has been piqued by that little red bike up front.

 

[Staffy]

A cx500 and 650 turbo? I hate you, sir.

 

[crazypj]

Damn where do you find a set of forks like that for that kind of money I just found out the front end I was going to use on my next XS650 project has bent forks. So I'm looking and an inverted front end would be pretty good on it. Will have to shop where you do!

Tim,
'old' USD forks can be had pretty cheap.
The 'squids who crash bikes and bend forks don't generally realise you can fit 'different' manufacturer forks and only look for those specific to the bike they have (UJSM only uses 3 different manufacturer's)
I was given for some 2002 Suzuki GSX-R forks for some machining work, I think guy only paid $75~$85 for them (but, steering stem is missing and top yoke has been drilled for 'stunta' bars : )

 

[cb750dude]

wrecked 1999 Buell X1
If I do a build thread on this thing were would I put the thread?
Its not vintage really? Its modern cafe?
All Im gonna do to this thing is fix the broke, and strip the crap.

 

[biker_reject]

Sweet! What's the damage? Love the header pipe configuration on the tuber Buells. Cool bikes. Have fun with it.

 

[cb750dude]

Sweet! What's the damage? Love the header pipe configuration on the tuber Buells. Cool bikes. Have fun with it.

So far just the headlight assembly, airbox, signals, and bars.
got her cheap with only 6400 miles on the clock

 

[cobraace2]

......whore....... :-*

I mean that in the best way....looks like my pile of "potential" except your pile is far better organized! I'm very jealous of your Katana and my interest has been piqued by that little red bike up front.

Whore yes thank you. ;D That Hans Muth design is an xn85 not as edgy as a katana but same lines . It is part of my factory turbo bike collection

The little guy is a 1969 Hodaka ACE 100 with a road toad 100 engine

And here is the rest of the shop

 

[cobraace2]

A cx500 and 650 turbo? I hate you, sir.

Here is the full house #1seca #2 xn85 #3 the mighty cx650t #4 the cx500t #5 the enforcer gpz750turbo

 

[Staffy]

I now hate you even more , sir

 

[Hoosier Daddy]

I now hate you even more , sir

X2 (strokes)

 

[4eyes]

I spy RZness!

 

[JustinLonghorn]

Mmmmmm, R-Zed

 

[Mr.E]

Picked this up last night for a whopping $120. And it even has a title! 1979 cx500 deluxe. Its gonna get tucked back in the garage until my other 750, xr100, xr80, and cb500t are done... so yeah, its gonna be kinda while :

 

[Ringo]

mmmmm-hmmmm

 

[Staffy]

Picked this up last night for a whopping $120. And it even has a title! 1979 cx500 deluxe. Its gonna get tucked back in the garage until my other 750, xr100, xr80, and cb500t are done... so yeah, its gonna be kinda while :

Nice one. PM sent about this bike too.

 

[sxecafe]