Post a pic of your latest purchase

[Brodie]

I bought a 2001 er5 engine. Had to take everything attached to it as a part of the deal.

 

[canyoncarver]

I bought a 2001 er5 engine. Had to take everything attached to it as a part of the deal.

Those are good lumps. What's the plan for it?

 

[Brodie]

Well I needed a parallel twin with about 50hp and wanted it to be 6 speed, heaps of available parts and air cooled. I missed out on the air cooled but that is ok. Plan is to get it running and see if it fits in a frame I have...

That frame cannot be registered due to it being a write off. Check out the bend in the left fork leg.

 

[Maritime]

Scored these for 200 bucks. Over 1000 new. Cant wait to get some shoes and mount them.

 

[1fasgsxr]

Few OEM bits and chain and sprockets. ..

 

[1fasgsxr]

Picked this up from Matt

 

[Tim]

Picked up a used Bluestar gas range already converted to propane for the cottage.

Selling my old propane stove for more than I paid for this Bluestar, which is a sweet deal

 

[Rider52]

Jiu Jitsu mats for a school my youngest is opening in New Mexico.

 

[farmer92]

Aerial shot out of a cheap drone we picked up for “farm use” haha

Unfortunately the video range is horrible so i will try to fix that with a tx03 soon.
Control range is nice though, way further than i can track without binoculars.

 

[canyoncarver]

Jiu Jitsu mats for a school my youngest is opening in New Mexico.

Cool, where? Albuquerque?

 

[Rider52]

Las Cruces

 

[trek97]

Picked up a used Bluestar gas range already converted to propane for the cottage.

Selling my old propane stove for more than I paid for this Bluestar, which is a sweet deal

Tim, Why are you Baking your tape ruler? ;D

 

[VonYinzer]

Tim, Why are you Baking your tape ruler? ;D

"Tape ruler"?

 

[Brodie]

I had a chuckle at that also.

 

[Sonreir]

Picked this up from Matt

Glad it finally arrived!

 

[Maritime]

Set of shoes for the wheels. They are very nice Nokian Rotiiva's mounted easy, inflated and test road, didn't need to take them anywhere be balanced, smoothe all the way to 85MPH. Also did the front sway bar links and bushings so CRV is all tight and quiet again for now.

 

[Brodie]

I bought some knee pads. In typical British bike fashion I had to do a bit of work to get them to fit properly.

 

[cxman]

so i got this 110 and 2 ct90s today

 

[Luugo86]

so i got this 110 and 2 ct90s today

Lucky !

 

[JustinLonghorn]

Pegs. Shocks. Lucky