Post a pic of your latest purchase

[teazer]

Are they a taper bore or parallel and do they match a stock 160 head? They do look really nice.

 

[redwillissuperman]

Are they a taper bore or parallel and do they match a stock 160 head? They do look really nice.

They are straight taper. They port match to a stock head but I left a little meat to slow any hand porting to oversized intake ports.

 

[redwillissuperman]

My plan is to run 5hp shot of nitrous to get it over the ton - no 99mph for this guy

 

[Tune-A-Fish]

Think there is enough interest for 6 sets? I can make them cheaper by the dozen.

Yep, @ $100 a set you will sell out fast. where do you source the boots also??

 

[redwillissuperman]

Do you guys need boots too? I have a boot guy.

 

[Tune-A-Fish]

Package deals are nice...


Sent from my iPhone using Tapatalk

 

[irk miller]

Kydex sheet for upholstering my 7fitty seat.


Sent from my iPhone using Tapatalk

 

[Tune-A-Fish]

I have holsters made with that but a seat cover?

 

[irk miller]

I have holsters made with that but a seat cover?

I'll show you in the thread. It's .118" thick and forms with a heat gun, so conforming to my seat shape will be easy, especially where it curls up in the back. It'll be the base with foam attached and covered.

 

[1sttimer]

I'll show you in the thread. It's .118" thick and forms with a heat gun, so conforming to my seat shape will be easy, especially where it curls up in the back. It'll be the base with foam attached and covered.

That's an awesome idea. A great alternative to fiberglass for simple contours. What's the best way to cut it?


Sent from my iPhone using Tapatalk

 

[Barkingmadspeedshop]

That is a cool thing for him to do for you

I thought so.

 

[Barkingmadspeedshop]

nice stuff there you know you can re-sharpen files, if yer interested ill splain it

With Acid or?

 

[doc_rot]

nice stuff there you know you can re-sharpen files, if yer interested ill splain it

yes please do. i have a bunch of old files that i don't use because they are dull

 

[J-Rod10]

yes please do. i have a bunch of old files that i don't use because they are dull

You can liquid hone them, or use acid.

I just buy new ones. They're cheap enough to not bother with resharpening them.

 

[jag767]

If you guys like them I can make more. I have one extra set currently.

Has a 1/8NPT port for carb sync, intake balance tube or nitrous.

Those fit a 175? If they do please pm me with info, I'm in.

 

[redwillissuperman]

Those fit a 175? If they do please pm me with info, I'm in.

I will verify versions for the CB160, CB175 and CB200. I have each of those engines on hand. Those may also fit the single-cylinder Hondas but I don't have any to check.

Everyone using Keihin PE22 or PE24 carbs?

 

[J-Rod10]

Those look great, Red.

 

[Maritime]

Hopefully this will allow me to shift the GL with a fused ankle. I haven't been able to get the bike upright to try and shift it but from what I read it will be easier with the heal toe shifter so I grabbed this off the bay for 40 bucks, Ended up being $57 CAD shit exchange is crap right now.

 

[CALfeRacer]

Crap for you guys and great for those of us who like to hop the border to take advantage of the drinking age

 

[Sonreir]

And awesome for me, since I'm going to Europe in August. ;D